User manual PIONEER DJM-350-W

[. . . ] The Pioneer website listed above provides answers to frequently asked questions, information about software, and other up-to-date data of assistance to our customers. Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. [. . . ] (When the crossfader moves away from either the left or right edge, the sound is immediately output from the opposite side. Switch the channel whose sound is output from the speakers. This operation is not necessary when the [THRU, fader curve selector) switch is set to [THRU]. the master level indicator e on the control panel lights. Adjust [MASTER LEVEL] so that the orange indicator lights at the point in the track where the volume is loudest (the climax, etc. Be careful that the red indicator does not light, or the sound could be distorted. While checking the sound output from the speakers, operate the crossfader to substitute the sound of [CH-1] with the sound of [CH-2]. Mixing is completed once only the [CH-2] sound is being output from the speakers. Using the fader to play a Pioneer DJ player (fader start) If you connect a Pioneer DJ player using a control cable (supplied with a DJ player), you can start playback of control other operations of the DJ player with the fader of this unit. The fader start function can only be used when connected to a Pioneer DJ player. Connect this unit and Pioneer DJ player beforehand. Refer to Specifications on page 16 for the range of sound that can be adjusted by each control. The sound for that range can be turned completely off by turning the control all the way counterclockwise (isolator function). Move the channel fader g all the way to the front. Prepare the unit in advance so that the sound of [CH-1] 1 is being output from the speakers. for instructions on preparation , see Outputting sound on page 9. For instructions on monitoring the sound, see Monitoring the sound over headphones (headphones section) on page 11. If you set the channel fader back to the original position, the player instantaneously returns to the cue point already set and pauses playback (back cue). Move the crossfader to the opposite edge from the channel for which you want to use the fader start function. The sound of [CH-2] is monitored from the headphones. This adjusts the balance of the monitor volume between the sound output from the [MASTER OUT 1, 2] terminals (the sound of [CH-1]) and the sound of [CH-2]. While checking the sound over the headphones, adjust the tempo of [CH-2] track to match the tempo of [CH-1] track. [. . . ] Once the number 999 is reached, no new files can be created in the folder. If this happens, move the files in the folder to a different folder. set the USB device's write-protect switch to the off position. Use a USB device without a security function. [. . . ]