User manual PIONEER DTV6010

[. . . ] Aviosys DTV 6010 TV TUNER CARD OPERATING INSTRUCTIONS DISTRIBUTED BY PIONEER EUROPE For Pioneer PDP 503MXE / 433MXE Safety & Warning Keep the manual in safe place you will find it very useful in the future. The DTV 6010 TV Tuner Card is exclusively used for PIONEER PDP 503MXE & 433 MXE, and distributed by PIONEER EUROPE . The PDP-503MXE & PDP-433MXE Plasma display has been originally designed as a computer monitor , but by installing the optional DTV 6010TV Tuner Card , the following features are available:: 1. Allows use of additional input jacks(INPUT 3, 4, 5) supporting TV, SCART, and DVI signal. [. . . ] If channel station only support MONO Mono NO Stereo 2. If channel support STEREO : AUDIO LEFT RIGHT STEREO 3. IF channel support DUAL language AUDIO DUAL- A DUAL - B 13 Watching TV English Watching TV English Set Main Source 1. Press TV button to set to TV, press SCART button to set to SCART. Press SWAP button will exchange Main Source between TV and SCART. Audio is output for main channel Press SCART Swap Main source with Sub-Picture Press SWAP Button. Press SWAP A 5 TV 5 A SCART TV Fade in / out Sub-Picture 1. A red frame around Sub-Picture and OSD prompt appears. The red frame and OSD prompt disappears. Press SET Press SCART Press TV Move Sub-Picture 1. A red frame around Sub-Picture and OSD prompt appears. Sub-Picture will move to one of the 9 positions on screen. Press MOVE to fix the Sub-Picture position. TV E Press MOVE TV E Press 5 Freeze the MAIN screen Press HOLD Button in TELETEXT area. The main screen will freeze and then press HOLD button again to resume normal operation. 5 1 4 7 2 5 8 Press MOVE 3 6 9 E Watching TV 14 Watching TV TILE 12 Mode Main Picture and 12 Sub -Pictures Display the TILE 12 screen: Press On/Off i n PIP section and then TYPE to select Tile12 , if MAIN is set to TV. The Sub-pictures will display the input from SCART with a strobing effect. Page Down Sub -Pictures 1 Press MOVE button A red frame appears around the last Sub-Picture. All Sub-Pictures is paged down, and the red frame disappears. MAIN Set Main Source / SWAP Function 1. Press TV button to set to TV, press SCART button to set to SCART. Or Press SWAP button to set between TV and SCART. Scart Scart Scart Scart Press Display Continuous Pictures for Selected Sub-Picture. The Selected Sub-Picture is active and around with a red frame 2 Press SWAP Button The continuous frames of Selected Sub-Picture display on all Sub-Pictures. 1 12 11 10 9 8 2 3 4 5 6 7 Press MOVE 13 24 23 22 14 15 16 17 SCART SCART 18 21 20 19 CH 1 CH 2 CH 3 CH 4 SCART Scart Scart TV Scart Scart CH 12 CH 11 SCART CH 5 CH 6 Press MOVE AND THEN Scart Scart Scart Scart Press TV 14 CH 10 CH 9 CH 8 CH 7 14 14 14 14 14 Press SWAP 13 24 23 22 14 15 16 17 14 When SCART is main picture the sub-picture became a channel browser. Select a Sub -Picture 1. A red frame appears around the active Sub-Picture. Each time a different Sub-Picture is selected, it become active, the previous Sub-Picture then ceases to be active SCART 14 14 SCART 18 21 20 19 14 14 14 To conver t a the selected Sub-Picture Screen to FULL Screen Press SET button The Selected Sub-Picture displays on full screen. CH 1 CH 2 CH 3 CH 4 CH 12 CH 11 CH 1 CH 2 CH 3 CH 4 Press MOVE FREEZE the MAIN screen Press HOLD Button in TELETEXT area. The main screen will freeze and then press HOLD button again to resume normal operation. . CH 6 CH 11 CH 6 CH 10 CH 9 CH 8 CH 7 CH 10 CH 9 CH 8 CH 7 Press CH 1 CH 2 CH 3 CH 4 CH 3 Press SET CH 12 CH 11 SCART CH 5 CH 6 CH 10 CH 9 CH 8 CH 7 15 Watching TV SCART CH 5 CH 12 SCART CH 5 English Watching TV TILE 16 Mode TV WALL with 16 screens English Display the TILE 16 screen: Press On/Off in PIP section and then TYPE to select Tile16 Select a Sub -Picture 1. A red frame appears around the active Sub-Picture. With each press of the button, the Selected screen becomes active, the red frame moving around it, and the previous active screen is no longer active. Page Down Sub -Pictures 1 Press MOVE button A red frame appears around the last Sub-Picture. Channel1-16 is paged down to next 16 channel (17-33, 24-40 and so on ), and the red frame disappears. [. . . ] Press SET button to set to the new Timing Mode. Pictures display in new Timing Mode, and Set Mode closed. TV Menu SCART IN Set Set Main Picture SCART Input Source for SCART Button on remote controller. When SCART Button pressed, the Main Picture will change to the SCART IN Source. English 1. Press / to switch between : Auto, Video, S Video, RGB. If set to Auto Mode, System will auto detect Video or S Video input source for Main Picture. 4. [. . . ]