User manual PIONEER DU-L77

[. . . ] The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This product contains a laser diode of higher class than 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. The following caution label appears on your unit. [. . . ] If you make a mistake while in the menu system, simply press & to cancel and exit. The CD menu gives you access to the following functions: CD PROGRAM - Specify the track order on a disc (page 34) CD REPEAT MODE - Set the current track or disc to repeat play (page 36) CD RANDOM PLAY - The player plays tracks in a random order (page 37) The tuner menu gives you access to the following functions: STATION MEMORY - Memorize station frequencies for quick recall (page 39) STATION NAME - Give station memories meaningful names (page 41) (You'll only see this option if you're in Station mode see page 39. ) FM AUTO/MONO - Specify the FM reception mode (page 28) (You'll only see this option if you're in FM reception mode. Access to many of the less commonly used functions of the system is via a menu system. Each component (CD player, tuner, tape deck, auxiliary, and MD recorder) has it's own set of menu options, but access to all of them is from the MENU button. If you worked through the last section, you'll have already used the menu system when you switched between mono and auto FM reception, or switched Dolby NR on/off. The tape menu gives you access to the following functions: REVERSE MODE - Play a single side, or both sides of a tape automatically (page 48) COUNTER RESET - Set the tape counter to zero (page 55) DOLBY NR - Switch the Dolby Noise Reduction on or off (page 32) This mode lets you program a sequence (a playlist) of up to 24 tracks to play. Tracks can appear more than once in the playlist, or can be left out entirely. The playlist applies only to the disc in the player at the time. Once you eject the disc (or switch the power into standby), the playlist is lost. Remember: switch between menu options using the $ and > buttons; select the option by pressing SET. 2 Select a track to add to the playlist using the $ or > buttons. For example, to add track 3, press > three times. Track 3 has been selected as the first track in the playlist. After pressing SET, the step is memorized. If you make a mistake, press CANCEL to delete the last (most recent) track programmed. 5 When you're happy with the playlist, press MENU. After pressing MENU, the display shows the number of tracks in the playlist, and the total running time of the playlist. You can only check the playlist order when the disc is stopped. Once stopped, you can step through the playlist using the $ and > buttons. Each track number on the playlist is displayed together with the track length. If you then press CANCEL, the total playing time of the playlist is displayed. [. . . ] Use a dry cloth to wipe the surface dry. Do not use volatile liquids such as benzene and thinner which may damage the surfaces. The recording/playback head in the tape deck gradually becomes magnetized after long periods of use. Playback and recording quality will suffer as a result, with a lack of treble and increased noise. [. . . ]