User manual PIONEER DV-320-K

[. . . ] Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] The factory default settings are indicated in italic. About Sound Retriever function When audio data is removed during the compression process, sound quality often degrades. Adjusts the look of the dark portions of the picture. The changed settings are stored in the memory. Hue (green 9 to Adjusts the balance between red 9) green and red. chroma Level (-9 to 9) Adjusts the density of the colors. This setting is effective for sources with many colors, such as cartoons. The factory default settings are indicated in italic. Brightness, Contrast, Gamma, Hue and Chroma Level are set to 0 upon purchase. Initial Settings cannot be selected during playback. 3 Select the item and change the setting. Notes HDMI Out, HDMI Resolution and HDMI Color can only be set when the player is connected to an HDMI-compatible device using an HDMI cable (DV-420V only). Digital Audio Out, AV Connector Out and Component Out cannot be set when the player is connected to an HDMI-compatible device using an HDMI cable (DV-420V only). Use the buttons on the player's front panel. Setting the Component Out and HDMI Resolution settings back to their defaults Use the buttons on the player's front panel. This can be selected when the connected HDMI-compatible device does not support multichannel audio. audio signals supported by the connected HDMI-compatible device (Dolby Digital , DTS , MPEG and linear PCM) are output. Audio signals not supported by the connected HDMI-compatible device are converted to linear PCM for output. No audio signals are output from the HDMI OUT terminal. The settings can only be changed when the player and HDMI-compatible device are connected using an HDMI cable. If the connected HDMI-compatible device is not compatible with DTS audio, the DTS audio signals are not output (the DTS audio signals are not converted to linear PCM signals for output). On Audio signals are output from the DIGITAL AUDIO OUT terminals. [. . . ] , could cause the print or paint to peel off. Also, leaving rubber or vinyl products in contact with the player for long periods of time could mar the cabinet. when using chemical-impregnated wipes , etc. , read the cautions included with the wipes carefully. [. . . ]