User manual PIONEER DVD-V8000

[. . . ] Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. [. . . ] Also, when playing "video material" DVDs, selecting [On] will produce a single composite of odd fields and even fields for progressive scan conversion. This setting is suitable for "video materials" with relatively little movement, or for "video materials" recorded in 30P (Progressive scan) mode. ¶ This effect may not be produced when [Resolution] is set to [VGA] (page 48). This unit has been designed to allow connection to a DVI device. Proper operation may not be possible when connected to some HDMI devices. SETUP menu for selecting the following 27 special functions: (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16) (17) (18) (19) (20) (21) (22) (23) (24) (25) (26) (27) COMMAND STACK WEEKLY TIMER POWER ON START TITLE PLAY MODE KEY LOCK REPEAT MODE SERIAL PORT BAUD RATE REV STEP/REV PLAY BLACKBOARD LOCK PLAYER CONTROL PANEL SETUP LOCK (MOUSE) GOTO DVD-MENU MOUSE CURSOR EXTEND TERMINAL SYNC OUT(DURING SQ) EXTERNAL SYNC MONITOR OSD AUTO PASS THROUGH PLAY START MODE LOAD SETUP incl WEEKLY TIMER SAVE SETUP incl WEEKLY TIMER LOAD COMMAND STACK SAVE COMMAND STACK LOAD WEEKLY TIMER SAVE WEEKLY TIMER SAVE ERROR LOG For [WEEKLY TIMER], [POWER ON START], and [KEY LOCK], use the cursor buttons (|, \) to alternate between [ON/OFF]; when [ON] is selected and the ENTER button is pressed, the next menu will allow detailed settings. for [EXTEND TERMINAL] , use the cursor buttons (| , \) to select [Standard/User]. When [User] is selected, pressing the ENTER button will allow settings to be entered at the next menu. For other items, use the up/down cursor buttons (», «) on this menu page to select the item, then use the left/right cursor buttons (|, \) to select the [ON/OFF] or other value. SETUP menu items can be set using the mouse as well as the remote control unit. Place the mouse cursor over the item you wish to set and click the left mouse button to select the item. Clicking on the page number at the upper right of the display screen will change the page being displayed. When an item is selected, clicking the left or right mouse button will allow the item's value to be changed. ¶ When the [WEEKLY TIMER], [POWER ON START], or [KEY LOCK] menu items are set to [ON], and the left mouse button is clicked, a menu will appear allowing detailed values for each item to be changed. ¶ On the [EXTEND TERMINAL] menu, when [User] is selected and the left mouse button is clicked, a menu will appear allowing detailed values to be changed. With DVD discs: repeat play is performed for a single chapter. With CD and video CD discs: repeat play is performed of a single track. Automatic start/stop using the timer is not performed. All contents of the disc are played back repeatedly. When [ON] is selected and the ENTER button is pressed, the daily power on time/power off time setting menu will appear. Only a single type of connector may be used at one time. When connecting to a PC using a 15-pin to 9-pin adapter cable. [. . . ] With DVD video, up to 9 angles can be recorded. A recording format in which data is written continuously to the DVD-R/DVD-RW disc using the same format used with commercial DVD software disc bearing the or logos. The entire component output signal is composed of the three elements luminance Y, CB/PB, and CR/PR, with the result that connecting to a television monitor equipped with component inputs will results in the production of a more beautiful image. Since analog signal conversion is not required, high image quality is preserved. [. . . ]