User manual PIONEER DVJ-1000

[. . . ] RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION This product is a class 1 laser product, but this product contains a laser diode higher than Class 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. refer all servicing to qualified personnel. [. . . ] Depending on the disc, the style, contents, and operation method used in the menu may be different. Basic operations are performed by using the cursor button's four sides ( / / / ) to select options, and by pressing the ENTER button to confirm the selection. For detailed instructions on using a disc's menu, consult the operating guide provided with the disc. Special DJ functions are not supported in this mode. When the rear panel NORMAL/DJ switch is set to "DJ" and auto cue function (see next item) is OFF, if the disc is set for automatic playback start (or or the menu's "Play" item has been selected), playback will begin. When the auto cue function is set to ON, the player will automatically cue to the selected cue point and the cue indicator will light; the play/pause indicator will flash, indicating that the player is in standby mode. If the PLAY/PAUSE (6) button is then pressed, the player will skip over the non-recorded portion of the indicated chapter and immediately begin playback. When playback comes to the end of the current track, the next track will be cued. The cue indicator will light, and the play/pause indicator will flash, indicating that the player is in standby mode. When the PLAY/PAUSE (6) button is pressed, the player will begin playback of the next chapter. ¶ Some of the above operations may not be supported, depending on the disc or the portion being played. When the rear panel NORMAL/DJ switch is set to "NORMAL", playback will begin automatically from the first track, and when the final track ends, playback will stop. Special DJ functions are not supported in this mode. When the rear panel NORMAL/DJ switch is set to the "DJ", if the auto cue function is OFF, playback will begin automatically from the first track, and when the final track ends, playback will stop and the unit will enter standby. When the auto cue function is set to ON, the player will automatically cue to the selected cue point and the cue indicator will light; the play/pause indicator will flash, indicating that the player is in standby mode. If the PLAY/PAUSE (6) button is then pressed, the player will skip over the non-recorded portion of the indicated track and immediately begin playback. When playback comes to the end of the current track, the next track will be cued. The cue indicator will light, and the play/pause indicator will flash, indicating that the player is in standby mode. When the PLAY/PAUSE (6) button is pressed, playback will begin from the next track. When playing a CD disc recorded with MP3 files, playback will begin automatically from the first track in the first folder on the disc; when the final track of the folder ends, playback will stop and the unit will enter standby. # This function is not supported when the rear panel NORMAL/DJ switch is set to the NORMAL position. This function is used to skip non-recorded (silent) portions at the beginning of tracks and automatically set the cue point ( P. [. . . ] Displayed when the card inserted contains corrupted data. Displayed when point data is not recorded with cue point navigation. Displayed when using cue point navigation to read in (call) cue point data. Displayed when using cue point navigation to read in (call) loop point data. [. . . ]