User manual PIONEER DVJ-X1000 UPGRADE INSTRUCTIONS

[. . . ] DVD PLAYER DVJ-1000 Operating Instructions IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. D1-4-2-3_En-A NOTE: THE NO USER-SERVICEABLE PARTS COMPARTMENT WARNING IS LOCATED ON THE APPLIANCE BOTTOM. 1) 2) 3) 4) 5) 6) 7) Read these instructions. [. . . ] For details, consult the Operation Instructions accompanying your disc. Enter 4--Digit Code +/­ Move RETURN SETUP Return Exit 2. Input the previously set code number. Input the 4-digits by pressing the cursor button's up/down ( / ) sides to increment/decrement numbers, and the left/right sides ( / ) to move between digits. 33 Preparations (Setup) 3. Press the ENTER button. The [Change Code Number] screen will appear. Audio1 A2 Video1 V2 Language General Parental Lock: Change Code Number Country/Area Code List Country/area ARGENTINA AUSTRALIA AUSTRIA BELGIUM BRAZIL CANADA CHILE CHINA DENMARK FINLAND FRANCE GERMANY HONG KONG INDIA INDONESIA ITALY JAPAN KOREA, REPUBLIC OF MALAYSIA MEXICO NETHERLANDS NEW ZEALAND NORWAY PAKISTAN PHILIPPINES PORTUGAL RUSSIAN FEDERATION SINGAPORE SPAIN SWEDEN SWITZERLAND TAIWAN THAILAND UNITED KINGDOM UNITED STATES OF AMERICA Input-code 0118 0121 0120 0205 0218 0301 0312 0314 0411 0609 0618 0405 0811 0914 0904 0920 1016 1118 1325 1324 1412 1426 1415 1611 1608 1620 1821 1907 0519 1905 0308 2023 2008 0702 2119 Country/areacode ar au at be br ca cl cn dk fi fr de hk in id it jp kr my mx nl nz no pk ph pt ru sg es se ch tw th gb us Enter 4--Digit Code +/­ Move RETURN SETUP Return Exit 4. Enter a new 4-digit password (code number). Input the 4-digits by pressing the cursor button's up/down sides ( / ) to increment/decrement numbers, and the left/ right sides ( / ) to move between digits. 5. Press the ENTER button. The password (code number) will be changed. To change the country code Consult the accompanying Country Code List when making this setting. 1. Select [Country Code] and press the ENTER button. The [Confirm Code Number] screen will appear. Audio1 A2 Video1 V2 Language General Country Code: Confirm Code Number Enter 4--Digit Code +/­ Move RETURN SETUP Return Exit 2. Input the previously recorded 4-digit password (code number). Input the 4-digits by pressing the cursor button's up/down sides ( / ) to increment/decrement numbers, and the left/ right sides ( / ) to move between digits. 3. Press the ENTER button. The Setup Country Code menu will appear. Audio1 A2 Video1 V2 Language General Country Code List of Codes us Setup Country Code +/­ Move RETURN ENTER Code (0~2) 2 1 1 9 Select SETUP Return Exit 4. Select either [List of Codes] or [Code] The numbers listed in parentheses ( ) beside [Code] indicate the range of numbers possible. I When using [Code] to select the country code: (Example) Selecting the code for U. S. A. Input the 4-digit code number (2, 1, 1, 9) by pressing the cursor button's up/down sides ( / ) to increment/decrement numbers, and the left/right sides ( / ) to move between digits. I When using [List of Codes] to select the country code: (Example) Selecting the code for U. S. A. Use the cursor button's up/down side ( / ) to highlight [us]. 5. Press the ENTER button. 34 Basic Operations (Loading and Removing Discs) Loading and Removing Discs Forced eject function Insert with label surface upwards In event of a player malfunction or if the EJECT (0) button does not respond to allow removal of a disc, the disc can be removed by inserting the accessory pin into the forced eject hole on the front of the player. When using the forced eject function, be sure to following the accompanying precautions. 1 Turn off the player's power and wait for at least one minute. Attempting the forced eject function immediately after turning off the power may cause the following dangers: ¶ The disc may be ejected while still rotating, resulting in personal injury. ¶ The disc may be damaged due to the disc clamp's rotating in an unstable condition. 2 Use only the provided accessory pin for this procedure (do not use other pointed objects). The forced eject pin is located on the bottom surface of the player. When the accessory pin is inserted fully into the forced eject hole, the disc will be ejected from the loading slot by about 5 mm to 10 mm. It can then be grasped with the fingers and removed. Hold evenly when inserting 1. Set the rear panel POWER switch to ON. Do not attempt to forcibly insert a disc when the POWER switch is set to OFF, since the disc or player may be damaged. 2. Insert the disc into the loading slot. ¶ Hold the disc with label surface upwards and insert evenly into the front-panel disc loading slot. [. . . ] Accessories ¶ ¶ ¶ ¶ ¶ ¶ ¶ Power cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Audio cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Control cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]