User manual PIONEER DVR-320

[. . . ] DVD Recorder DVR-320 Operating Instructions IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. D3-4-2-1-1_En-A WARNING: The apparatus is not waterproofs, to prevent fire or shocks hazard, do not expose this apparatus to rain or moisture and do not put any water source near this apparatus, such as vase, flower pot, cosmetics container and medicine D3-4-2-1-3_En bottle etc. WARNING: BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY. [. . . ] If two programs have the same times (but different channels, for example), the program set most recently takes priority. · I entered a timer program, but the recorder doesn't confirm whether or not it's OK. Timer confirmation only works for DVD recordings when there is a recordable disc loaded. Also make sure that the disc is not locked (see Lock Disc on page 68) and that there are fewer than 99 titles already recorded. Note that it's possible that although the timer recording screen says OK, the recording doesn't complete successfully because of some other reason, such as a damaged disc, etc. Important · Note that you must use a DVD-RW Ver. 1. 2 / 4x disc to be able to use this feature. · You may not be able to use this feature with a DVD-RW disc that was first initialized on another recorder. · During recording, press PLAY to start playback from the beginning of the current recording, or press DISC NAVIGATOR and select another title to play from there. You can use all the usual playback controls, such as pause, slow-motion play, scan and skip. · To stop playback, press continue). · To stop recording, press continue). Note · You can't start playback immediately after recording starts. · When scanning, no sound is output if the recorder is also recording (see Scanning discs on page 35). · You can't use this feature during Auto Start Recording, or in Auto Start Recording standby (the AUTO indicator is lit in the front panel display). STOP (recording will STOP REC (playback will Simultaneous recording and playback VR mode A feature called Chase Play makes it possible to watch a recording in progress from the start of the recording (as in, playback is `chasing' the recording). For example, perhaps you have to miss the first 30 minutes of a movie on TV; you can start recording, then start watching the movie, from the beginning, while the recorder is still recording 30 minutes ahead of you. In fact, you're not just limited to watching the recording in progress; you can watch anything else already on the DVD by selecting it from the Disc Navigator screen (see Using the Disc Navigator with recordable discs on page 34). 50 En Recording 06 Recording from an external component VR mode Video mode 4 Press ì REC when you're ready to start recording. Note · If your source is copy-protected using CopyGuard, you will not be able to record it. See Restrictions on video recording on page 43 for more details. You can record from an external component, such as a camcorder or VCR, connected to one of the recorder's external inputs. INPUT SELECT Automatic recording from a satellite tuner VR mode Video mode CLEAR ENTER If you have a satellite tuner or some other kind of set top box connected to the L1 input, you can have the recorder start and stop recording automatically with the timer settings of the connected component. (If the other component doesn't have a built-in timer, you'll need to use it with an external timer unit. ) After setting up for Auto Start Recording, this recorder starts recording when it detects a signal from the other component. When the signal ceases, the recorder stops recording. If you want to use this recorder with the timer features of your satellite tuner, see Language code list on page 91. REC REC MODE ì 1 Make sure that the component you want to record from is connected properly to the DVD recorder. [. . . ] DVD Video Recording DVD-VIDEO Recordable discs DVD-RW (DVD Re-recordable disc) DVD-R (DVD Recordable disc) Video recording format Sampling frequency . MPEG Audio recording format Sampling frequency . . Dolby Digital or Linear PCM (uncompressed) Recording time Fine (FINE) . 2V rms (Input impedance: more than 22 k) Jacks . [. . . ]