User manual PIONEER DVR-S806

[. . . ] This product complies with the Low Voltage Directive (73/23/EEC, amended by 93/68/EEC), EMC Directives (89/336/EEC, amended by 92/31/EEC and D3-4-2-1-9a_En 93/68/EEC). CAUTION This product is a class 1 laser product, but this product contains a laser diode higher than Class 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. refer all servicing to qualified personnel. [. . . ] The product may fall and be seriously damaged. VENTILATION ­ Slots and openings in the cabinet and back or bottom are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. They should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed in a built-in installation unless proper ventilation is provided. POWER SOURCES ­ This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. PLUG ­ This product is equipped with a wired grounding-type plug (a plug having a third (grounding) pin). This plug will only fit into a grounding type power outlet. If you are unable to insert the plug fully into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug. POWER-CORD PROTECTION ­ When unplugging the apparatus, pull on the plug ­ not on the cord. Do not handle the cord on plug with wet hands. Doing so could cause an electric short or shock. Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. OVERLOADING ­ Do not overload wall outlets and extension cords as this can result in fire or electric shock. OBJECT AND LIQUID ENTRY ­ Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. CONDENSATION ­ Moisture will form in the operating section of the product and the product's performance will be impaired if the product is brought from cool surroundings into a warm room or if the room temperature rises suddenly. To prevent this, let the product stand in its new surroundings for about an hour or two before switching it on, or ensure that the room temperature rises gradually. SERVICING ­ Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. [. . . ] The unit is provided with two IEEE 1394 ports to enable daisy chaining. Turn on the unit before connecting it to the computer. Be sure not to disconnect it during data transfers. Note: Do not connect the unit using both the IEEE 1394 cable and the USB cable. [. . . ]