User manual PIONEER EG-X707

[. . . ] Precaution In case of trouble 3 SD memory card 3 Manual overview 3 Conventions used in this manual 3 Models to be upgraded 4 Visit our website 4 Setting items to be deleted and initialised by upgrade 4 Functions disabled by upgrade 4 Licence agreement PIONEER EG-X707 5 Whereis® Navigation Digital Road Map Data Licence Terms 7 Licenses 9 About the database About the data for the map database 14 Copyright 14 Instructions for upgrading The navigation system upgrade process 15 Preparation for upgrade 15 ­ Checking the device number 15 ­ Getting the password for authentication 15 Upgrade procedures 16 ­ Upgrading the software programme and the map database 16 2 Engb Chapter Precaution !Read the entire manual before upgrading the programme of your navigation system. This package is unique, and cannot be installed on more than one unit. Web-connected computer is required for online issuance of password. 01 Precaution p SDHC Logo is a trademark of SD-3C, LLC. In case of trouble ! [. . . ] The "Service Information Screen" screen appears. 5 Write down your device number (Device Number) onto the supplied Media Number Card (MEDIA NUMBER CARD) to avoid mistakes. p Also write down "Version" information which would be used to confirm completion of the update. Instructions for upgrading 2 Get the password for authentication. = For details, refer to Getting the password for authentication on this page. j 3 Upgrade the software programme of your navigation system. = For details of the operation, refer to Upgrading the software programme and the map database on the next page. j 4 Check whether the upgrade was done properly. = For details of the operation, refer to Checking whether the upgrade was done properly on page 17. j 5 Update the Bluetooth firmware. = For details of the operation, refer to Updating the Bluetooth wireless technology software on page 17. j Getting the password for authentication For upgrade, an unique password issued online is necessary. Access the website with your PC and get your password. Media Number (MEDIA NUMBER) printed on supplied Media Number Card (MEDIA NUMBER CARD) !Device Number (DEVICE NUMBER) of your navigation system 1 Access on the following website to issue your password. http://www. pioneer. com. au/ For issuing the password, follow the instruction on the website. Engb 15 Chapter 04 Instructions for upgrading 2 Record the password that you received. You need to input this password accurately. If you make a mistake, Bluetooth wireless technology functions will become unavailable. p Consult your authorised dealer if you are unable to use Bluetooth wireless technology functions. Be sure to complete the Bluetooth firmware update procedure without interruption. p Registered phones that are listed on the "Connection List" screen are cleared by the software update. 1 Insert the upgrade SD memory card #1 into the SD card slot. 2 Press the HOME button to display the "Top Menu" screen. The "Settings Menu" screen appears. The "Bluetooth Settings" screen appears. 6 Confirm the Bluetooth firmware version. Make sure that the current version is 2. 50. Engb 17 Chapter 04 Instructions for upgrading 7 Touch [Firmware update]. The message confirming whether or not to start the update will appear. 8 Make sure that the current Bluetooth firmware version is 2. 50 and the new Bluetooth firmware version is 3. 10. 16 If the current version is 3. 10, touch [Firmware update]. [. . . ] Disc: Plays throughout the current disc. Chapter: Repeats just the current chapter. p If you perform chapter (title) search, fast forward, fast reverse or slow motion playback, the repeat play range changes to "Disc". p This function is not available when disc playback has been stopped. [. . . ]