User manual PIONEER F-301RDS

[. . . ] If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be obtained from your local dealer. If the fitted moulded plug is unsuitable for your socket outlet, then the fuse shall be removed and the plug cut off and disposed of safely. [. . . ] Listening to your system With multichannel sources, you can select from: · Straight Decode ­ Plays back without the DOLBY PLIIz HEIGHT effects. When the surround back speaker is connected. 2 If you connected surround back speakers, see also Using surround back channel processing on page 34. With two channel sources, you can select from: · dOLBY PLIIx MOVIE ­ Up to 7. 1 channel sound, especially suited to movie sources · dOLBY PLIIx MUSIC ­ Up to 7. 1 channel sound, especially suited to music sources3 · dOLBY PLIIx GAME ­ Up to 7. 1 channel sound, especially suited to video games · nEO:6 CINEMA ­ Up to 6. 1 channel sound, especially suited to movie sources · nEO:6 MUSIC ­ Up to 6. 1 channel sound, especially suited to music sources4 · dOLBY PRO LOGIC ­ 4. 1 channel surround sound (sound from the surround speakers is mono) With multichannel sources, if you have connected surround back speaker(s) and have selected SB ON, you can select (according to format): · DOLBY PLIIx MOVIE ­ See above (only available when you're using two surround back speakers) · DOLBY DIGITAL EX ­ Creates surround back channel sound for 5. 1 channel playback with DTS-ES encoded sources · DTS NEO:6 ­ Allows you to hear 6. DIRECT ­ Sources are heard according to the settings made in the Surround Setup (speaker setting, channel level, speaker distance), as well as with dual mono settings. 1 You will hear sources according to the number of channels in the signal. PURE DIRECT ­ Analog and PCM sources are heard without any digital processing. When audio data is removed during the compression process, sound quality often suffers from an uneven sound image. The Sound Retriever feature employs new DSP technology that helps bring CD quality sound back to compressed 2-channel audio by restoring sound pressure and smoothing jagged artifacts left over after compression. Listening to your system Phase Control technology provides coherent sound reproduction through the use of phase matching1 for an optimal sound image at your listening position. The default setting is on and we recommend leaving Phase Control switched on for all sound sources. Using surround back channel processing You can have the receiver automatically use 6. 1 encoded sources (for example, Dolby Digital EX or DTS-ES), or you can choose to always use 6. 1 encoded sources, a surround back channel will be generated, but the material may sound better in the 5. 1 format for which it was originally encoded (in which case, you can simply switch surround back channel processing off). [. . . ] If they are not, please connect them using the component or composite video jacks. Depending on the connected source component, it's possible that it will not work with this receiver (even if it is HDCP-compatible). In this case, connect using the component or composite video jacks between source and receiver. If video images do not appear on your TV, try adjusting the resolution, Deep Color or other setting for your component. [. . . ]