User manual PIONEER GEX-P700DAB annexe 1

[. . . ] Using the DAB Functions with AVM-P9000R . Using the DAB Functions with DEH-P9100R . This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking Directive (93/68/EEC). This product features a number of sophisticated functions ensuring superior reception and operation. [. . . ] Using the DAB Functions with DEH-P9100R Each press changes the Mode . Each press of the FUNCTION button selects the mode in the following order: Service List (SRVC. list) = Language Filter (Language Filter) = Announcement Support (Announcement Support) = Service Follow (Service Follow) = Service Component (Primary/Secondary)* = Dynamic Label (DAB Text)** * You cannot switch to this mode with a Service that has just one Service Component. **You cannot switch to this mode with a Service Component that has no Dynamic Label. After entering the Function menu, if you do not perform an operation within about 30 seconds, the Function Menu is automatically canceled. This unit does not feature FUNC4 and AUTO function capability. Using the DAB Functions with DEH-P9100R You can also select and recall the desired Service directly with the 1 to 6 buttons. When you select another Ensemble or Service, or perform PTY Search, you can set the unit to give priority to Service Components broadcast in a desired language. setting for up to 6 languages is possible. If you switch the Language Filter Function ON when you have set more than 6 Languages, the Languages least recently set are switched OFF. (Details concerning each operation are provided in each section. The Languages that can be set with this unit are the 29 Languages shown below. They are in alphabetical order for easier location. (The switching order differs from that indicated in the display during Language Filter mode operation. Using the DAB Functions with DEH-P9100R announcement Support Function Even when listening to non-DAB sources, the Announcement Support Function lets you automatically listen to set Announcement Support. When the interrupting announcement ends, play returns to the original source. When listening to a DAB broadcast, you can switch setting for announcement interruption ON/OFF, except for Alarm announcements. Switching between Announcements is as follows: Announcement that is always ON: Each time you press the TA button, the announcement is switched ON/OFF. When listening to FM, turning ON/OFF the RDS TA function will simultaneously turn ON/OFF the DAB Road Traffic Flash and Transport Flash. To cancel a Road Traffic Flash or Transport Flash interruption and return to the original source, press the TA button during an Announcement interruption. You can also switch in order between interrupting Announcements. When the following conditions arise, the TP indicator " " goes out, and after 30 seconds, the TP Alarm beeps for 5 seconds, reminding you to select a Service Component supporting Road Traffic Flash and Transport Flash. [. . . ] Switching between Announcements is as follows: Announcement that is always ON: Each time you press the TA button on the Remote Controller, the announcement is switched ON/OFF. When listening to FM, turning ON/OFF the RDS TA function will simultaneously turn ON/OFF the DAB Road Traffic Flash and Transport Flash. Using the DAB Functions with AVM-P9000R 7 Canceling Road Traffic Flash and Transport Flash interruptions part way through · To cancel a Road Traffic Flash or Transport Flash interruption and return to the original source, press the TA button during an Announcement interruption. You can also switch in order between interrupting Announcements. [. . . ]