User manual PIONEER GM-3500T

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PIONEER GM-3500T. We hope that this PIONEER GM-3500T user guide will be useful to you.

Lastmanuals help download the user guide PIONEER GM-3500T.


Mode d'emploi PIONEER GM-3500T
Download
Manual abstract: user guide PIONEER GM-3500T

Detailed instructions for use are in the User's Guide.

[. . . ] Check the connections of the power supply and speakers if the fuse of the separately sold battery wire or the amplifier fuse blows. Determine and resolve the cause, then replace the fuse with and identical equivalent. Do not allow this unit to come into contact with liquids. Also, damage to this unit, smoke, and overheating could result from contact with liquids. [. . . ] Output of 4 V or more, adjust level to match that of the car stereo output. If you hear too much noise when using the speaker input terminals, turn the gain control to higher level. 3 Power indicator The power indicator lights up to indicate power ON. Above illustration shows NORMAL gain setting. Relationship between amplifier gain and head unit output power If amplifier gain is raised improperly, this will simply increase distortion, with little increase in power. Signal waveform when outputting at high volume using amplifier gain control Signal waveform distorted with high output, if you raise the gain of the amplifier the power changes only slightly. The female terminal can be connected to the auto-antenna relay control terminal. To protect the wiring, wrap sections in contact with metal parts in adhesive tape. Never cut the insulation of the power supply to feed power to other equipment. 1 Special red battery wire RD-223 (sold separately) After completing all other amplifier connections, finally connect the battery wire terminal of the amplifier to the positive (+) battery terminal. 2 Ground wire (Black) RD-223 (sold separately) Connect to metal body or chassis. 3 Car stereo with RCA output jacks (sold separately) 4 External output 5 Connecting wire with RCA pin plugs (sold separately) 6 Speaker input terminal (use a connector included) Please see the following section for speaker connection instructions. Never shorten any wires, the protection circuit may malfunction. Never ground speaker wire directly or band together multiple speakers' negative (*) lead wires. If the system remote control wire of the amplifier is connected to the power terminal via the ignition switch (12 V DC), the amplifier will remain on with the ignition whether the car stereo is on or off, which may exhaust battery if the engine is at rest or idling. Install and route the separately sold battery wire as far as possible from the speaker wires. Install and route the separately sold battery wire, ground wire, speaker wires and the amplifier as far away as possible from the antenna, antenna cable and tuner. Improper connection to the amplifier may result in malfunction or personal injury due to burns from overheating. [. . . ] To ensure proper heat dissipation of the amplifier, ensure the following during installation: -- Allow adequate space above the amplifier for proper ventilation. -- Do not cover the amplifier with a floor mat or carpet. Protection function may activate to protect the amplifier against overheating due to installation in locations where sufficient heat cannot be dissipated, continuous use under high-volume conditions, etc. Avoid routing wires through hot areas, such as near the heater outlet. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PIONEER GM-3500T

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PIONEER GM-3500T will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag