User manual PIONEER HTZ-7

[. . . ] Due to copy-protection technology the picture may be distorted. Always connect the DVDRW/HDD Tuner directly to your TV. Antenna in Video in direction indicated by the arrow. AM loop antenna FM wire antenna b Clip the loop onto the stand. [. . . ] Always connect the DVDRW/HDD Tuner directly to your TV. Antenna in Video in direction indicated by the arrow. AM loop antenna FM wire antenna b Clip the loop onto the stand. If you want to fix to a wall or other surface, perform this step after first securing the stand with screws. Connecting the DVD-RW/HDD tuner a Connect the supplied yellow video cable to e TV the MONITOR OUT VIDEO jack on the DVDRW/HDD tuner and a video input on your TV. c It is recommended that you determine the reception strength before securing the stand with the screws. OUT VHF/U SCREW ANTEN MAX4m NA m R FRONT L CENTER R SURROUND L b Connect the antenna/cable TV wall outlet to the VHF/UHF ANTENNA IN connector on the DVD-RW/HDD tuner. c Use an RF antenna cable to connect the VHF/UHF ANTENNA OUT connector on the DVD-RW/HDD tuner to the antenna input on your VCR (or directly to your TV if you're not connecting a VCR). HF IN COMPON ENT Y S - VID EO S - VID EO AUDIO L IN L OUT S - VID EO IN VIDEO R AUDIO R OUT S - VID EO L 12-pin system cable A (blue plugs) FM UN BAL 75 AM /FM AM AN TEN LOOP NA PB VIDEO MONIT OR OUT If you're not connecting a VCR, connect the RF antenna cable from the antenna/cable TV wall outlet directly to the DVD-RW/HDD Tuner. Antenna out a Antenna in PR VIDEO IN CONTRO L LIN (AUTO E1 IN R DVD-RW/HDD Tuner LINE 3 IN LINE OU T VCR Audio/Video out START REC) 16-pin system cable B (black plugs) ANALO G AUDIO VIDEO R AUDIO L USE ON LY WI TH S-D VR9 SW OUT OPTIC IN 1 AL DIG ITAL AU IN 2 DIO c AC IN 2 Connect the speakers to the powered subwoofer Please also see the S-DVR9ST Speaker setup guide. a Each speaker cable, speaker and terminal on the Surround right Connecting your VCR d Use a three-way RCA audio/video cable to connect your VCR to the LINE 3 IN AUDIO and VIDEO jacks. e Use an RF antenna cable to connect the d CAUTION: Do not connect the supplied speakers to another amplifier or system. This could damage the speakers, or result in fire. OUT VHF/UHF ANTENNA SCREW IN MAX4mm COMPONENT S - VIDEO S - VIDEO AUDIO L IN L OUT IN S - VIDEO VIDEO R AUDIO L Y LINE3 IN Gray powered subwoofer is color coded. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. When you find it damaged, ask your nearest Pioneer authorized service center or your dealer for a replacement. If the AC plug of this unit does not match the AC outlet you want to use, the plug must be removed and appropriate one fitted. Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. If connected to an AC outlet, the cut-off plug can cause severe electrical shock. [. . . ] Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. If connected to an AC outlet, the cut-off plug can cause severe electrical shock. [. . . ]