User manual PIONEER JA-R1A

[. . . ] Also, damage to this unit, smoke, and overheating could result from contact with liquids. "CLASS 1 LASER PRODUCT" This product contains a laser diode of higher class than 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Always keep the volume low enough so that you can hear sounds from outside the vehicle. [. . . ] # If you do not operate the list within about 30 seconds, the display automatically returns to the ordinary display. Selecting tracks from the track title list Track title list lets you see the list of track titles on a CD TEXT disc and select one of them to play back. # If you do not operate the list within about 30 seconds, the display automatically returns to the ordinary display. If you do not operate functions within about 30 seconds, the display automatically returns to the ordinary display. File name list lets you see the list of file names (or folder names) and select one of them to playback. FOLDER ­ Repeat the current folder # If you select another folder during repeat play, the repeat play range changes to disc repeat. # Performing track search or fast forward/reverse during TRACK (track repeat) changes the repeat play range to disc/folder. # When FOLDER (folder repeat) is selected, it is not possible to play back a subfolder of that folder. # You can also perform this operation in the menu that appears by using MULTI-CONTROL. # To turn pause off, press 2/PAUSE again. # You can also perform this operation in the menu that appears by using MULTI-CONTROL. # If the auxiliary setting is not turned on, AUX cannot be selected. Turning the clock display on or off You can turn the clock display on or off. Even when the sources are off, the clock display appears on the display. % Press CLOCK to turn the clock display on or off. Each press of CLOCK turns the clock display on or off. # The clock display disappears temporarily when you perform other operations, but the clock display appears again after 25 seconds. When this unit is installed in a vehicle without ACC (accessory) position on the ignition switch, red cable must be wired to the terminal that can detect the operation of the ignition key. Use of this unit in conditions other than the following could result in fire or malfunction. To prevent a short-circuit, overheating or malfunction, be sure to follow the directions below. To protect the wiring, wrap adhesive tape around them where they lie against metal parts. -- Place all cables away from moving parts, such as gear shift and seat rails. [. . . ] You cannot connect a USB portable audio player/USB memory to this unit via a USB hub. Partitioned USB memory is not compatible with this unit. Depending on the kind of USB portable audio player/USB memory you use, this unit may not recognize the USB audio player/USB memory or audio files may not be played back properly. Do not leave the USB portable audio player/USB memory in direct sunlight for extended amounts of time. [. . . ]