User manual PIONEER KEH-3800RDS

[. . . ] If the battery is disconnected or discharged, the preset memory will be erased and must be reprogrammed. The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. Use in other areas may result in improper reception. The RDS function operates only in areas with FM stations broadcasting RDS signals. [. . . ] the selected radio station frequency has been stored in memory. The next time you press the same preset tuning button 16 the radio station frequency is recalled from memory. Note Up to 12 FM stations, 6 for each of the two FM bands, and 6 MW/LW stations can be stored in memory. When you press VOLUME up/+, the volume is raised and when pressed down/, the volume is lowered. The frequencies move up or down step by step. Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 2 When you want to return to normal seek tuning, press LOCAL/BSM to turn local seek tuning off. BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under preset tuning buttons 16 and once stored there you can tune in to those frequencies with the touch of a button. % Press LOCAL/BSM and hold until the BSM turns on. While BSM is flashing the six strongest broadcast frequencies will be stored under preset tuning buttons 16 in order of their signal strength. # To cancel the storage process , press LOCAL/BSM. If the unit fails to find a suitable alternative frequency, or if you are listening to a broadcast and the reception becomes weak, the unit will automatically search for a different station with the same programming. During the search, PI SEEK is displayed and the output is muted. The muting is discontinued after completion of the PI Seek, whether or not a different station is found. TA (traffic announcement standby) lets you receive traffic announcements automatically, no matter what source you are listening to. TA can be activated for both a TP station (a station that broadcasts traffic information) or an enhanced other networks TP station (a station carrying information which cross-references TP stations). 1 Tune in a TP or enhanced other networks TP station. When you are tuned into a TP or enhanced other networks TP station the TP indicator will light. # To turn traffic announcements standby off, press TA/AF again. When preset stations cannot be recalled, as when travelling long distances, the unit can be set to perform PI Seek during preset recall. When AF is used to automatically retune frequencies, the regional function limits the se- When you press VOLUME up/+, the volume is raised and when pressed down/, the volume is lowered. the newly set volume is stored in memory and recalled for subsequent traffic announcements. [. . . ] If you perform track search or fast forward/reverse during TRK, the repeat play range changes to DSC. Play will resume at the same point that you turned pause on. 50-disc multi-CD players can not be operated with this unit. 1 BTB indicator Shows when the BTB other than FLAT is selected. [. . . ]