User manual PIONEER KEH-8400R

[. . . ] IMPROPER CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE. To avoid the risk of accident and the potential violation of applicable laws, the front DVD or TV (sold separately) feature should never be used while the vehicle is being driven. Also, rear displays should not be in a location where it is a visible distraction to the driver. In some countries or states the viewing of images on a display inside a vehicle even by persons other than the driver may be illegal. [. . . ] When you select the file, that selection will begin to play. 42 En Section Multi-CD Player 09 Listening to a CD 1 2 3 4 2 Press any of 16 to select a disc you want to listen to. For discs located at 1 to 6, press the corresponding button number. If you want to select a disc located at 7 to 12, press and hold the corresponding numbers, such as 1 for disc 7, until the disc number appears in the display. # You can also sequentially select a disc by moving the joystick up or down. 5 Only when using this unit with ADD-ON mode (M), you can perform the following operations by this unit. You can use this unit to control a multi-CD player, which is sold separately. These are the basic steps necessary to play a CD with your multi-CD player. More advanced CD operation is explained starting on the next page. 1 Source icon Shows which source has been selected. 2 Disc number indicator Shows the disc currently playing. 3 Track number indicator Shows the track currently playing. 4 Play time indicator Shows the elapsed playing time of the current track. 5 Disc list display Shows the disc title list. If you perform track search or fast forward/reverse during TRACK, the repeat play range changes to DISC. # To go to the next group of function names, move the joystick to NEXT and click it. # To return to the previous group of function names, move the joystick to PREV and click it. # To return to the previous display, press BACK. # To return to the playback display, press BAND/ESC. Playing tracks in a random order Random play lets you play back tracks in a random order within the repeat range, M-CD and DISC. 2 Use the joystick to select RANDOM. 44 En Section Multi-CD Player 09 3 Move the joystick up to turn random play on. Tracks will play in a random order within the previously selected M-CD or DISC ranges. # To turn random play off, move the joystick down. 2 Move the joystick up to turn pause on. Play of the current track pauses. # To turn pause off, move the joystick down. Using ITS playlists ITS (instant track selection) lets you make a playlist of favorite tracks from those in the multi-CD player magazine. After you have added your favorite tracks to the playlist you can turn on ITS play and play just those selections. Scanning CDs and tracks While you are using DISC, the beginning of each track on the selected disc plays for about 10 seconds. When you are using M-CD, the beginning of the first track of each disc is played for about 10 seconds. Refer to Repeating play on the previous page. 2 Use the joystick to select SCAN. Multi-CD Player Creating a playlist with ITS programming You can use ITS to enter and play back up to 99 tracks per disc, up to 100 discs (with the disc titles). [. . . ] 1. 0 V (1 kHz, 0 dB) Number of channels . . . . . . . . . . . . . . 2 (stereo) MP3 decoding format . . . . . . . . . . . MPEG-1 & 2 Audio Layer 3 WMA decoding format . . . . . . . . . 7 & 8 Additional Information Infrared remote control Screen size/aspect ratio . . . . . . . [. . . ]