User manual PIONEER KEH-P1013R

[. . . ] If the battery is disconnected, the preset memory will be erased and must be reprogrammed. Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station. The following explains the initial operations required before you can listen to music. Each press of the SOURCE button selects the desired source in the following order: Tuner = Cassette player = Multi-CD player = External Unit Note: â· External Unit refers to a Pioneer product (such as one available in the future) that, although incompatible as a source, enables control of basic functions by this product. [. . . ] To turn AF back ON, repeat the preceding operation. The muting is discontinued after completion of the PI Seek, whether or not the PI seek has succeeded. If the tuner fails to locate a suitable alternative frequency or if the broadcasting signal is too weak for proper reception, the PI Seek will automatically start. When preset stations cannot be recalled, as when traveling long distances, this product can be set to perform PI Seek also during preset recall. When AF is used to retune the tuner automatically, REG (regional) limits the selection to stations broadcasting regional programs. Regional programming and regional networks are organized differently depending on the country (i. , they may change according to the hour, state or broadcast area). â· The preset number may disappear on the display if the tuner tunes in a regional station which differs from the originally set station. â· REG can be switched ON or OFF independently for each FM band. To turn REG back ON, repeat the preceding operation. The TA (Traffic Announcement standby) function lets you receive traffic announcements automatically, no matter what source you are listening to. The TA function can be activated for either a TP station (a station that broadcasts traffic information) or an enhanced other network's TP station (a station carrying information which cross-references TP stations). The "TP" indicator lights when the tuner is tuned to a TP station or an enhanced other network's TP station. The "TA" indicator lights, indicating that the tuner is waiting for traffic announcements. Repeat the preceding operation when no traffic announcement is being received to deactivate the TA function. The system switches back to the original source following traffic announcement reception. â· The TA function can be activated from sources other than tuner if the tuner was last set to the FM band but not if it was last set to the MW/LW band. â· If the tuner was last set to FM, turning on the TA function lets you operate other tuning functions while listening to sources other than tuner. â· Only TP or enhanced other network's TP stations are tuned in during the Seek Tuning mode when the "TA" indicator is ON. â· Only TP or enhanced other network's TP stations are stored by BSM when the "TA" indicator is ON. Press the TA/AF button while a traffic announcement is being received to cancel the announcement and return to the original source. When a traffic announcement begins, the volume adjusts automatically to a preset level to enable you to hear the announcement clearly. [. . . ] Since the FM volume is the control, SLA is not possible in the FM modes. â· The MW/LW volume level, which is different from the FM base setting volume level, can be adjusted similar to sources other than tuner. The front panel of the head unit is detachable to discourage theft. To remove the front panel, pull its right-hand side toward you. [. . . ]