User manual PIONEER KEH-P5200RDS

[. . . ] We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you begin using this unit. It is especially important that you read and observe precautions on this page and in other sections. This manual explains head unit operation. You can perform the same operations with the remote control (CD-R30). Precautions English 2 Keep this manual handy as a reference for operating procedures and precautions. [. . . ] The track presently playing will continue to play and then play the next track. Playing a CD English 1 2 3 Espaol You can use this unit to control a multi-CD player, which is sold separately. 1 TRACK NUMBER indicator Shows the track currently playing. Deutsch Skipping blank tape sections Blank skip automatically fast forwards to the next song if there is a long period of silence (12 seconds or longer) between songs. Long periods of silence between songs will be skipped. The complete cassette tape will play. 2 PLAY TIME indicator Shows the elapsed playing time of the current track. 3 DISC NUMBER indicator Shows the disc currently playing. Franais Italiano Radio intercept This function allows you to listen to the radio during tape fast-forwarding/rewinding. Nederlands 1 Press 6 to turn radio intercept on. RI OFF appears in the display. En 10 Multi-CD Player 1 Press SOURCE to select the multi-CD player. When you press VOLUME up/+, the volume is raised and when pressed down/, the volume is lowered. 3 Select a disc you want to listen to with the 1 to 6 buttons. For discs located at 1 to 6, press the corresponding number button. If you want to select a disc located at 7 to 12, press and hold the corresponding numbers such as 1 for disc 7, until the disc number appears in the display. You can also sequentially select a disc by pressing 5/. 2 LOUD indicator Appears in the display when loudness is turned on. Press AUDIO to display the audio function names. Press AUDIO repeatedly to switch between the following audio functions: FAD (balance adjustment)--EQ-L (equalizer)-- LOUD (loudness)--FIE (front image enhancer)--SLA (source level adjustment) When selecting the FM tuner as the source, you cannot switch to SLA. To return to the display of each source, press BAND. Note If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. 13 En Audio Adjustments Using the equalizer The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired. Adjusting equalizer curves English You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CUSTOM. 1 Press AUDIO to select the equalizer mode. Press AUDIO until EQ-L/EQ-M/EQ-H appears in the display. Recalling equalizer curves There are six stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves: Display SPR-BASS POWERFUL NATURAL VOCAL CUSTOM EQ FLAT Equalizer curve Super bass Powerful Natural Vocal Custom Flat Espaol Deutsch 2 Select the band you want to adjust with the 2/3. EQ-L (low) --EQ-M (mid) --EQ-H (high) 3 Press 5 or to adjust the equalizer curve. Each press of 5 or increases or decreases the equalizer curve respectively. +6 6 is displayed as the equalizer curve is increased or decreased. [. . . ] 0. 09% (WRMS) Frequency response . . . . . . . . . . . 30 16, 000 Hz (3 dB) Stereo separation . . . . . . . . . . . . . . . 61 dB (IEC-A network) FM tuner Frequency range . . . . . . . . . . . . . . . . . 87. 5 108. 0 MHz Usable sensitivity . . . . . . . . . . . . . . . [. . . ]