User manual PIONEER KEH-P6200RDS

[. . . ] All are designed for the easiest possible use, but many are not self-explanatory. This operation manual is intended to help you benefit fully from their potential and to maximise your listening enjoyment. We recommend that your familiarise yourself with the functions and their operation by reading through the manual before you begin using this unit. It is especially important that you read and observe the "Precaution" on this page and in other sections. [. . . ] The station is stored in memory under whichever of the buttons you selected. There are two ways to recall preset stations. The Programmable button operates differently according to how it has been programmed (memorised). This data, which is inaudible, provides a variety of features such as programme service name, programme type display, traffic announcement standby, automatic tuning and programme type tuning, which are all intended to aid radio listeners in tuning to a desired station. Some stations may not provide an RDS service. â· RDS functions, such as AF (Alternative frequencies search) and TA (Traffic Announcement standby) are only active when your radio is tuned to RDS stations. With this function, the names of networks/stations providing RDS services replace the frequency on the display a few seconds after they are tuned in. Each time the button is pressed the mode is changed . Each time the DISP/Clock button is pressed the mode is selected in the order shown below: Programme Service Name = PTY Information = Frequency Note: â· After switching displays, if you do not perform an operation within 8 seconds, the Programme Service Name automatically displays. The AF (Alternative Frequencies search) function is used to search for other frequencies in the same network as the station that is currently tuned. It automatically retunes the receiver to another frequency in the network which is broadcasting a stronger signal when there are problems with reception of the currently tuned station or better reception is possible on a different frequency. â· The system switches back to the original source once reception of the traffic announcement has finished. â· The TA function can be activated from cassette player mode if the tuner was last set to the FM band, but not if it was last set to the MW/LW band. â· If the tuner was last set to FM, turning on the TA function enables you to operate other tuning functions while listening to a cassette. â· Only TP or EON TP stations are tuned in during the Seek Tuning mode when the "TA" indicator is ON. â· Only TP or EON TP stations are stored by BSM when the "TA" indicator is ON. Press the TA/AF button while a traffic announcement is being received to cancel the announcement and return to the original source. When a traffic announcement begins, the volume automatically adjusts to a preset level to enable you to hear the announcement clearly. About 30 seconds after the "TP" or "EON" indicator is extinguished due to a weak signal, a 5 second beep sounds to remind you to select another TP or EON TP station. If you are listening to the tuner, tune in another TP station or EON TP station. In cassette player mode, the tuner automatically seeks out the TP station with the strongest signal in the current area 10 (or 30)* seconds after "TP" disappears from the display. TA function ON TA, AF functions ON 10 seconds 30 seconds The PTY function enables you to select stations by the type of programmes they broadcast (PTY search). [. . . ] After selecting the Function Menu, if you do not perform an operation within about 30 seconds, the Function Menu is automatically cancelled. If you press the Function button for 2 seconds or more and select the Programmable button Setting mode, you can memorise the Radio Intercept mode ON/OFF setting beforehand. This function allows you to listen to the radio during tape fast forwarding/rewinding. A loose or warped label on a cassette tape may interfere with the eject mechanism of the unit or cause the cassette to become jammed in the unit. [. . . ]