Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PIONEER KRP-SW01. We hope that this PIONEER KRP-SW01 user guide will be useful to you.
Lastmanuals help download the user guide PIONEER KRP-SW01.
Detailed instructions for use are in the User's Guide.
[. . . ] This product rotates 10° to the left and right and inclines approximately 2° forward and backward. Do not place objects within the range of rotation of this product and the Pioneer display and television. [. . . ] Note that doing so might damage the Pioneer display and television panel or its ports or result in the warping of the stand. Attach the Pioneer display and television at the points marked with "T" using a Phillips screwdriver. Line up the column supports with the bottom of the Pioneer display and television as indicated in the accompanying diagram. There have been cases where unforeseen accidents such as the equipment breaking or Caution falling over occurred because the stand was installed with wrong screws. Finding the center of the rotation range of the stand. The state in which the fall-prevention straps attached to the stand are at a right angle in relation to the Pioneer display and television is the center of the angle of rotation of the stand. Fix the screws with a Phillips screwdriver. If the fall-prevention straps lean toward the left in relation to the Pioneer display and television, the rotation angle of the stand can be adjusted to the center by turning the display toward the left so that the fall-prevention straps form a right angle in relation to the Pioneer display and television. On this stand, you can adjust the angle of inclination of the Pioneer display and television within a range of approximately 2° forward or backward according to your preference. Firmly tighten the forward/backward inclination anchor bolts on the left and right sides by rotating them clockwise using the enclosed hexagonal wrench. Be sure to hold the top of the Pioneer display and television with your hand until you have fully tightened the bolts. BesuretoholdthetopofthePioneerdisplay and television with your hand while adjusting the angle. Loosen the forward/backward inclination anchor bolts using the enclosed hexagonal wrench (2 locations on the left and right). While being sure to hold the top of the Pioneer display and television with your hand, loosen the forward/ backward inclination anchor bolts on the left and right sides by rotating them counterclockwise using the enclosed hexagonal wrench. [. . . ] To remove the Pioneer display and television fromthestand, besuretoalwaysfollowthe procedure described below to prevent accidents. First clear a space on a flat floor etc. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PIONEER KRP-SW01
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PIONEER KRP-SW01 will begin.
