User manual PIONEER MJ-D508

[. . . ] The following caution label appears on your unit. Thank you for buying this PIONEER product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. [. . . ] Make sure that the erase-protect tab is closed so that you can record. If there's already material recorded on the disc, the recorder automatically records new material after what's already there--there's no need to search for blank space to record on. You can find out how much blank space you have left on the disc by switching the display mode at this point. MD enregistrable avec 3 plages déjà enregistrées Recordable MD with 3 tracks already recorded 62:56 est indiqué comme temps d'enregistrement disponible Recording time available is shown as 62:56 Display shows tape direction set to `forward', auto-reverse off and Dolby NR on The recorder goes into record-pause mode, waiting for you to start the tape. The SYNCHRO indicator lights and the red MD record indicator flashes Recording starts automatically with the tape. Should you want to stop recording before the tape has finished playing, simply press & any time during the recording. Once the tape (or side of the tape) has finished, the recorder goes into record-pause mode. At this point, you can either press & to finish the recording session, or continue recording a different tape by repeating steps 3, 4 and 6. Once recording starts, the MD record indicator remains lit If you want to record the whole tape, set the reverse mode to p ; if you just want to record just one side, set it to " . If the tape was recorded using Dolby NR, then Dolby NR should be switched on for best results. Access to many of the less commonly used functions of the XC­ L77 is via a menu system. If you then press CANCEL, the total playing time of the playlist is displayed. If you want to delete the playlist without ejecting the disc, simply press CANCEL twice. You can set the MD player to repeat just a single track, or the whole disc. This menu option is available when the disc is stopped, paused or playing. Remember: switch between menu options using the $ and > buttons; select the option by pressing SET. Three options are available: Remember: switch between menu options using the $ and > buttons; select the option by pressing SET. After setting a repeat mode, the display shows RPT for repeat all, or R1 for repeat track In one track repeat mode, any track you choose will repeat. If you jump to another track (using track skip), then the new track will start repeating. In all track repeat mode, whenever the end of the disc is reached, the player will jump back to the first track and continue playback. You're still free to skip tracks and use manual search. The repeat mode is indicated in the display while the disc is playing You can use either of the repeat modes together with the program play mode. [. . . ] Use the all erase function and record the MD from the beginning. Note: Error messages marked with an asterisk are followed by a number or other symbol. It's often easy to mistake incorrect operation for trouble and malfunction of the unit. If you think there is something wrong with the component, check the points below first. [. . . ]