User manual PIONEER MJ-L11

[. . . ] However, the method of connecting and operating the unit is the same. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. THE POWER SWITCH IS SECONDARY CONNECTED AND THEREFORE DOES NOT SEPARATE THE UNIT FROM MAINS POWER IN THE STANDBY POSITION. This product complies with the Low Voltage Directive (73/23/EEC), EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking Directive (93/68/EEC). IMPORTANT 1 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. IMPORTANT FOR USE IN THE UNITED KINGDOM The wires in this mains lead are coloured in accordance with the following code: Blue : Neutral Brown : Live If the plug provided is unsuitable for your socket outlets, the plug must be cut off and a suitable plug fitted. [. . . ] If you want to change the track numbers that are assigned automatically, there are various editing features at your disposal to renumber tracks as you wish. Once recording has started, you can't switch to another component until either the recording has stopped, or you pause the recording. So, for example, you can't switch over to the tuner while you're recording a CD. 13 4 Switching On Automatically Recording from a CD This feature makes recording a CD as simple as possible by automatically starting and stopping the CD and MD together. There are two modes: 1 track synchro records just a single track, then stops; all-track synchro records the whole disc. MD REC CD AUX/CD-R STANDBY/ ON SOUND DISPLAY SET MD REC TAPE TIMER/ & CHARACTER CANCEL $ !-- > +/ VOL MD 4 ¢ 1 Display showing that you've loaded a blank disc Load a recordable MD. Make sure that the erase-protect tab is closed so that you can record. If there's already material recorded on the disc, the recorder automatically records new material after what's already there--there's no need to search for blank space to record on. You can find out how much blank space you have left on the disc by switching the display mode at this point. See page 12 for how to do this. 2 3 The CD display showing a disc with 14 tracks and a total playing time of 59:47 Press CD to switch to the CD player. Load the CD you want to record. Press & to make sure the disc is stopped. 4 5 If you want to record just one CD track, select it using the $ and > buttons. Press MD REC. The recorder goes into record-pause mode, waiting for you to start the CD player. The SYNCHRO indicator lights and the red MD record indicator flashes 6 Once recording starts, the MD record indicator remains lit Press CD to start the CD playing. Recording starts automatically with the CD. Should you want to stop recording before the track/disc has finished playing, simply press & any time during the recording. Once the track or disc has finished, the recorder goes into record-pause mode. Remember: switch between menu options using the $ and > buttons; select the option by pressing SET. In Use 2 Track 3 programmed as the first item in the playlist For example, to add track 3, press > three times. Or, to add the last but one track, press $ twice. Select a track to add to the playlist using the $ and > buttons 3 This display appears briefly after pressing SET Press SET to add the track to the playlist. Repeat steps 2 and 3 to continue adding tracks to the playlist. If you make a mistake, press CANCEL to delete the last (most recent) track programmed. (Delete multiple tracks by pressing CANCEL repeatedly. ) 4 5 Display shows the number of tracks in the playlist and the total running time When you're happy with the playlist, press MENU. The playlist can be up to 24 tracks long. 6 Press MD button to start playback. Checking the playlist order You can only check the playlist order when the disc is stopped. Once stopped, you can step through the playlist using the $ and > buttons. Each track number on the playlist is displayed together with the track length. If you then press CANCEL, the total playing time of the playlist is displayed. Deleting the playlist If you want to delete the playlist without ejecting the disc, simply press CANCEL twice. 17 5 More Playback Features Playing Things Again You can set the MD player to repeat just a single track, or the whole disc. MENU SET AUX/CD-R STANDBY/ ON SOUND DISPLAY SET MD REC TAPE TIMER/ & CHARACTER CANCEL $ !-- > +/ VOL MD 4 ¢ 1 Press MENU and select REPEAT MODE. This menu option is available when the disc is stopped, paused or playing. Remember: switch between menu options using the $ and > buttons; select the option by pressing SET. 2 After setting a repeat mode, the display shows RPT for repeat all, or R1 for repeat track Select a repeat mode. Three options are available: $ REPEAT TRK?Remember: switch between menu options using the $ and > buttons; select the option by pressing SET. 3 The repeat mode is indicated in the display while the disc is playing Tip You can use either of the repeat modes together with the program play mode. Setting the repeat mode to REPEAT ALL plays the tracks in the playlist over and over. The display indicates the mode: Start playback. In one track repeat mode, any track you choose will repeat. [. . . ] Magnetic field modulation overwriting type Playback method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Non-contact optical type Sampling frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44. 1 kHz, 32 kHz, 48 kHz Frequency response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Hz - 20 kHz Signal-to-Noise ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]