User manual PIONEER MVH-X360BT

[. . . ] ователя Italiano Español Deutsch Nederlands Русский <QRD3211-B>1 Black plate (2, 1) Section 01 Before you start Before you start Thank you for purchasing this PIONEER product To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference. About this unit The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. [. . . ] This function may not be available depending on the type of Bluetooth audio player connected. The repeat play range varies depending on the Bluetooth audio player in use. Playing tracks in random order to turn random play on or off. The random play range varies depending on the Bluetooth audio player in use. pausing playback 1 Press 4/PAUSE to pause or resume. Enhancing compressed audio and restoring rich sound (sound retriever) Only for MVH-160UI 1 Press 3/S. Rtrv to cycle between: 1—2—OFF (off) 1 is effective for low compression rates, and 2 is effective for high compression rates. For details, refer to Enhancing compressed audio and restoring rich sound (sound retriever) on page 11. Once selected, the following audio functions can be adjusted. W CTRL are not available when REAR/REAR is selected in SP-P/O MODE. SLA is not available when FM is selected as the source. Switching the display Selecting the desired text information 1 Press DISP to cycle between the following: !POWERFUL—NATURAL—VOCAL—CUSTOM1—CUSTOM2—FLAT—SUPER BASS The equalizer band and equalizer level can be customized when CUSTOM1 or CUSTOM2 is selected. CUSTOM1 can be set separately for each source. However, each of the below combinations are set to the same setting automatically. CUSTOM2 is a shared setting used in common for all sources. To cycle between the following: Equalizer band—Equalizer level 5 Turn M. 5KHZ—8KHZ Equalizer level: +6 to –6 LOUDNESS (loudness) Loudness compensates for deficiencies in the lowfrequency and high-frequency ranges at low volume. W (subwoofer on/off setting) This unit is equipped with a subwoofer output which can be turned on or off. Once selected, the following functions can be adjusted. 11 <QRD3211-B>11 Black plate (12, 1) Section 02 Using this unit Using this unit Only frequencies lower than those in the selected range are outputted from the subwoofer. To cycle between the following: Cut-off frequency—Output level—Slope level Rates that can be adjusted will flash. [. . . ] ) Playable folders: up to 500 Playable files: up to 15 000 Playback of copyright-protected files: Not compatible Partitioned USB storage device: Only the first partition can be played. There may be a slight delay when starting playback of audio files on a USB storage device with numerous folder hierarchies. 1 kHz (MS ADPCM) USB storage device Playback sequence is the same as recorded sequence in the USB storage device. To specify the playback sequence, the following method is recommended. [. . . ]