User manual PIONEER PD-F21

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. IMPORTANT SAFETY INSTRUCTIONS READ INSTRUCTIONS -- All the safety and operating instructions should be read before the product is operated. RETAIN INSTRUCTIONS -- The safety and operating instructions should be retained for future reference. HEED WARNINGS -- All warnings on the product and in the operating instructions should be adhered to. [. . . ] Detection may not function properly depending on the color or shape etc. , of the disc. (Carry out step 3 within 5 seconds. ) WARNING: Do not put your hand or any other object inside the rack, otherwise injury or part damage may result. 3 UNLOAD Press UNLOAD. « RENTAL DISC TRACK REMAIN MIN SEC CDFILE 301­D ISC ALL RANDOM REPEAT - 1 BEST ADLC CUSTOM SINGLE CD TEXT PREVIOUS SCAN PROGRAM The hood will open. When UNLOAD is pressed, the hood opens to the disc corresponding to the disc No. displayed on the front of the unit. 4 Load the disc into the rack with the label side (printed surface) facing to the right. Label side faces right. (Side to be played faces left. ) Note!!· Inserting more than one disc into the slot will damage the discs and cause the unit to malfunction. 5 DISC/ CHARA PUSH ENTER Turn the jog dial clockwise to rotate the rack. When the jog dial is turned clockwise, the rack turns in the direction in which the disc number increases (1, 2, 3 . . . ). When turned counterclockwise, the rack turns in the opposite direction. · While changing or inserting discs, be careful not to press any buttons on the main unit or the remote control. The rack may move suddenly, and then your fingers may be caught between discs and the side of door. · When changing or inserting discs, make sure the rack is stopped. Do not attempt to put a disc in when the rack is moving. · Do not put anything other than CDs inside the rack. · Load only one disc into each disc slot. · If you did not select a play mode, playback starts in ALL. · SINGLE is selected automatically when playing the disc loaded in the Single Loader slot. <Last disc memory> When you press 7 or turn the power OFF, the unit memorizes the disc that was being played. The next time you press 6, playback will start from that same disc. (This feature is available except in the PROGRAM play, BEST play, PREVIOUS scan, HI-LITE scan and RANDOM play modes. ) To skip to another track Tap 41/¡¢ (or 4/¢ on the remote control unit). To fast forward/reverse. Hold-down 41/¡¢ (or 1/¡ on the remote control unit). 11 BASIC OPERATIONS 2 DIRECT CUSTOM Jog dial 1 ABC 2 DEF 3 TIME/ CHARA DISC/ CHARA PUSH ENTER 1 2 3 GHI 4 JKL 5 MNO 6 TITLE DISPLAY 4 5 6 ENTER TITLE DISPLAY INPUT SEARCH PQRS 7 TUV 8 WXYZ 9 TITLE INPUT 7 8 9 DISC SET MARK 0 TRACK SET TITLE SEARCH TIME/ MODE CLEAR PROGRAM RANDOM CHARA 1 10 STANDBY REFERENCE FILE-TYPE CD PLAYER STANDBY/ON Î SINGLE LOADER OPEN/ CLOSE ACCESS PLAY UNLOAD 6 7 41/¡¢ 7 6 < CURSOR > ­ 4 DISC + 1 ¡ ¢ DISC(­/+) 4/¢ 3 KEYBORD INPUT PHONES LEVEL 7 8 3 RANDOM MIN MAX 7 3 OPEN/CLOSE Single Loader slot Playing a disc that is not loaded in the rack Use the single loader slot to play discs that are not loaded in the rack . To play a track you want to hear Press 41/¡¢ during play or pause to choose the track number you desire (or press 4/ ¢ on the remote control). 1 SINGLE ACCESS Press SINGLE LOADER ACCESS. The hood will open with the single loader slot located in the front of the unit. During pause, press 6 after choosing the track. 2 Loading the disc into the Single Loader slot with the label side (printed surface) facing to the right. Label side faces right (Side to be played faces left) To start playback from a specific disc DISC/ CHARA PUSH ENTER 3 In the player pause, turn the jog dial to select the disc number. During pause, press 6 or ENTER ( 3 on the remote control unit) after choosing the disc. LOADER PLAY Press SINGLE LOADER PLAY. The play mode is set to SINGLE. (To perform this operation from the remote control unit, use the DISC (­/+) buttons to select the disc number. ) · Playback starts from the first track of the chosen disc. Tips: · The disc in the single loader slot can also be selected with the jog dial. Use the jog dial to select the spot after disc number 300 and before disc number 0 (where "P0" is displayed). · If a disc has been loaded in the Single Loader slot, pressing SINGLE LOADER PLAY allows you to play it anytime, even during playback of a disc stored in the rack. · To play the disc in the Single Loader slot using the remote control unit, press "0" and DISC. · When another PD-F21 is connected to create a 602-disc changer, the CDs loaded in the SLAVE unit (second PD-F21 ) are numbered from 301 to 600. When using the SLAVE unit's single loader slot, operate using the buttons on the SLAVE unit itself. Opening or closing the hood during playback To open the hood during playback OPEN/ CLOSE Press the OPEN/CLOSE button and hold it in for about 2 seconds. · "HOLD" is displayed after opening the hood. · In this case, the rack does not rotate. [. . . ] Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. When you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement. BEFORE OPERATING 3. [. . . ]