User manual PIONEER PD-F505

[. . . ] RETAIN INSTRUCTIONS -- The safety and operating instructions should be retained for future reference. hEED WARNINGS -- All warnings on the product and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS -- All operating and use instructions should be followed. CLEANING -- Unplug this product from the wall outlet before cleaning. [. . . ] In this case, detection will operate after PLAY is finished. Do not put your hand or any other object inside the rack, otherwise injury or part damage may result. Load the disc into the rack with the label side (printed surface) facing to the right. Inserting more than one disc into the slot will damage the discs and cause the unit to malfunction. When the jog dial is turned clockwise, the rack turns in the direction in which the disc number increases (1, 2, 3 . When turned counterclockwise, the rack turns in the opposite direction. While changing or inserting discs, be careful not to press any buttons on the main unit or the remote control. The rack may move suddenly, and then your fingers may be caught between discs and the side of door. When changing or inserting discs, make sure the rack is stopped. Do not attempt to put a disc in when the rack is moving. Do not put anything other than CDs inside the rack. The next time you press 6, playback will start from that same disc. (This feature is available except in the PROGRAM play, BEST play, PREVIOUS scan, HI-LITE scan and RANDOM play modes. Playing a disc that is not loaded in the rack Use the single loader slot to play discs that are not loaded in the rack. The hood will open with the single loader slot located in the front of the unit. In the player pause, turn the jog dial to select the disc number. During pause, press 6 or ENTER ( 3 on the remote control unit) after choosing the disc. (To perform this operation from the remote control unit, use the DISC (­/ +) buttons to select the disc number. ) · Playback starts from the first track of the chosen disc. Loading the disc into the Single Loader slot with the label side (printed surface) facing to the right. Label side faces right (Side to be played faces left) Opening or closing the hood during playback The disc in the single loader slot can also be selected with the jog dial. Use the jog dial to select the spot after disc number 300 and before disc number 0 (where "P0" is displayed). [. . . ] Specifications and design subject to possible modification without notice, due to improvements. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or an electric shock. Do not place the unit, a piece of furniture, etc. , on the power cord , or pinch the cord. [. . . ]