User manual PIONEER PD-M426A

[. . . ] has determined that this product meets the ENERGY STAR guidelines for energy efficiency grounding it on the following features. Auto Low Power This function conserves energy by lowering the set temperature of the fixing unit. In the standard setting, Auto Low Power operates automatically when 15 minutes have elapsed after completion of the last copy, with the copier remaining in the ready to copy state during that time. The time period for the Auto Low Power function can be set for 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 90 minutes, 120 minutes, or 240 minutes. 2-10 for details. Automatic Shut-Off This function achieves further energy conservation by partially turning OFF the power supply, thereby reducing energy consumption to 15W or less. [. . . ] However, copying will be available by using the following procedure. 1 Press POWER SAVER ON / OFF on the control panel. DATA COPY HINTS TIMER For details of the Weekly timer function, see p. 1231. INTERRUPT POWER SAVER ON / OFF PROOF COPY STOP / CLEAR The Basic screen will be displayed along with the message shown below. Timer interrupt mode Enter password The timer interrupt password is not factory set and must be entered by the key operator. In the event the timer interrupt password has not been entered by the key operator, the following message will display instead. Input copy time is 0 hour(s) 05 minute(s) When the above message displays, proceed to step 4 . 7-2 The machine power will be turned off automatically after 5 minutes from this state. Programmed Shut Off (Weekly Timer) 2 3 4 5 6 7 Enter the password. Enter a 4-digit number timer interrupt password using the keypad on the control panel. HINTS For setting the timer interrupt password, see p. 12-31. Press START . If an invalid password is entered, continue by entering the valid 4-digit password. The following message will be displayed on the Basic Screen. Input copy time is 0 hour(s) 05 minute(s) Set the hour for the interrupt use. Enter a 1-digit hour (ex. 3 hours is 3) using the keypad on the control panel. (0 ~ 9) Programmed Shut Off Touch Screens Rotation Press START . V/H Zoom Your copy time is 3 hour(s) 05 minute(s) Set the minute for the interrupt use. Enter a 2-digit minute (ex. 7 minutes is 07) using the keypad on the control panel. CANCEL key: Touch to cancel storing/recalling a job. ENTRY key: Touch to store a new job. HINTS See p. 4-5 for details. 7-6 Advanced Touch Screens (continued) I Getting Information on Machine Operation (Help Screen) The Help Screen displays when Screen displayed. RADF key: Touch to display the information on positioning originals in the document feeder. Assistance key: Touch to display the extension number of the Key operator. Staple key: Touch to display the infomation on replacing staple cartridge. HELP is pressed on the control panel with the Basic Toner key: Touch to display the information on adding toner. BYPASS key: Touch to display the information on loading paper into the Mult-sheet bypass tray. Touch to display the phone/fax number of your service centre. HELP MENU key: Touch to display the Help Menu Screen which provides a list of the copier functions. EXIT key: Touch to return to the Basic Screen. TRAY keys: Touch to display the information on loading paper in each tray. Programmed Shut Off Touch Screens Rotation Key-Ope mode key: Touch to enter the Key operator mode. V/H Zoom The Help Screen for giving instructions on the current setting will display when HELP is pressed with the current setting screen displayed. HINTS See p. 4-8 for details. Advanced Information 7 7-7 Advanced Touch Screens (continued) I Modifying Machine Settings (Key Operator Mode Screen) To access the Key Operator Mode, press HELP on the control panel when the Basic Screen is displayed, then touch Key Ope mode on the Help Screen. The Key Operator Password Entry Screen displays, if a unique key operator password has been set by service at installation. Enter the password to display the Key Operator Mode Screen. From this screen, the key operator can modify machine settings or monitor overall copier activities. Touch to display screens for setting each menu item. RETURN key: Touch to return to the Basic Screen. [. . . ] When setting change is desired, touch EDIT to display the Item Selection Screen. 2 Touch FILE EDIT or IMAGE EDIT, as desired. Key Operator Mode System Initial Copier Initial Preset Key EKC Lock Job Memory Paper Type Panel Contrast Key Operator Data 3 On the File/Image Edit Customize Screen, touch to highlight the desired application function key on the right, then touch ADD. Selected key will move to the left part of the screen, while the key on the right will be dimmed to show inactivity. 4 To cancel the selection you made, touch to highlight the desired key on the left, then touch DEL. [. . . ]