User manual PIONEER PD-S605

[. . . ] All the functions have been designed for the easiest possible use, but many are not self-explanatory. This operation manual will help you benefit fully from this unit's potential and maximize your listening enjoyment. We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you begin using this unit. It is especially important that you read and observe Precautions, WARNINGs and CAUTIONs in this manual. The "XM" logo on this unit indicates that it is an XM satellite radio receiver. [. . . ] AVH-P6400CD AVH-P6400 DEH-P8500MP DEH-P850MP KEH-P2030 · Functionality with head units other than those listed below may be limited, or not functional at all. Pioneer does not support or guarantee the functionality of this product with head units other than those listed below. Head unit group 2 When using "PD-S605" with the following head units, refer to the operation manual supplied with the head unit for operating instructions. DEH-P8600MP DEH-P860MP DEH-P80MP DEH-P8MP DEH-P7700MP DEH-P770MP Function compatibility chart Operate using the same buttons on the head unit itself or the remote control. Resetting the microprocessor The microprocessor must be reset under the following conditions: · Prior to using this unit for the first time after installation · If the unit fails to operate properly · When strange or incorrect messages appear on the display · When changing the unit combination Head unit group 4 Function Source switching Select the channel Changing the band Button SOURCE or BAND 1­6 (hold for 2 seconds) 1­6 or Operation Select Select Select Memory Head unit group 3 When using "PD-S605" with the following head units, refer to the operation manual supplied with the head unit for operating instructions. AVH-P7600DVD AVH-P7500DVD AVH-P6600DVD AVH-P6500DVD AVH-P5700DVD Notes · When using this product with "AVH-P7600DVD" or "AVH-P7500DVD", the FUNCTION menu in the XM source is not available. · When storing broadcast stations using with "AVH-P6500DVD", keep touching one of the preset tuning keys PRESET 1­PRESET 6 on the touch panel screen or press and hold one of the preset tuning buttons 1­6 on the remote control. Preset memory Direct recall Sequential recall (Channel number select mode) Select the category (Channel category select mode) Entering the function menu Switching the display (FUNC1) Scrolling the display (FUNC1) Switching the channel select mode (FUNC2) Recall Recall Press RESET on the unit with a pen tip or other pointed instrument. Head unit (e. g. DEH-P6700MP) CLOCK button Press and hold to change channel select mode. DISPLAY button Press to select different displays. FUNCTION button Press to select functions. / / / buttons Press to select a channel, recall a channel and select a category. BAND button Press to select among three XM bands and cancel the control mode of functions. 1­6 buttons Press for preset tuning. (Refer to "Switching the channel select mode". ) Storing and recalling channels If you press any of the preset tuning buttons 1­6 you can easily store up to six channels for later recall with the touch of a button. · Memory and recall are for broadcasts. If you recall a memorized broadcast that has been moved to another channel, the channel to which the broadcast was moved is selected. When you find a channel that you want to store in memory, press one of the preset tuning buttons 1­6 and hold until the preset number stops flashing. The number you have pressed will flash in the preset number indicator and then remain lit. The selected channel has been stored in memory. The next time you press the same preset tuning button, the channel is recalled from memory. Notes · Up to 18 channels, six for each of the three XM bands, can be stored in memory. · When channel number select mode is selected, you can also use and to recall channels assigned to preset tuning buttons 1­6. · If a channel you have recalled cannot be selected, a message is displayed for 2 seconds and the unit returns to the operating status before the channel was recalled. Switching the XM display XM channels each have a channel number and channel name. XM programing also carries the song or program title, the artist name and category when available. Press DISPLAY repeatedly to switch between the following settings: Channel name--Artist name/feature-- Song/program title--Channel category Introduction of advanced tuner operation Switching the channel select mode When selecting a channel, you can switch between selecting a channel by channel number or by channel category. [. . . ] Unit is acquiring audio or program information. The channel currently selected has stopped broadcasting. The user has selected a channel number that does not exist or is not subscribed to. There is no artist name/feature, song/program title, or channel category associated with the channel at that time. [. . . ]