Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PIONEER PDK-TS23. We hope that this PIONEER PDK-TS23 user guide will be useful to you.
Lastmanuals help download the user guide PIONEER PDK-TS23.
Detailed instructions for use are in the User's Guide.
[. . . ] Do not install it outdoors, at a hot spring, or near a beach. Do not install the stand where it may be subjected to vibration or shock. [. . . ] Turn the base cover over so the underside is facing up. Note When the base cover is turned over, be very careful not to scratch or damage the light-blocking shield. Note Assemble the stand with a soft sheet placed under the base cover. If a sheet is not laid before assembly, the front surface of the base cover may be scratched. The weight of a Plasma Display is about 40 kg (88 lbs), they have no depth, and are unstable. Therefore, at least two people must assemble and install them. note Insert the bolts in the holes vertically. Place a sheet or protective cover to protect the display from scratches or damage. Assemble only with the Plasma Display lying flat on a table or similar surface. Move the stand so that the stand screw holes and the nuts that connect the main display line up correctly. 7 Regarding the stand pipe screw holes when the stand is used as a desktop stand Please use A and A' in the following diagram. With the Plasma Display lying flat, insert and secure the two Installation bolts 1 (M8 x 20 mm: black) in the holes "a" located in center of the Plasma Display housing. At this point, tighten these bolts 1 only until the threads are no longer visible when viewed from the side (you will be unable to attach the display if the bolts are screwed in completely). As shown in the above diagram, hook the stand pipe holes A onto the screw heads of the installation bolts 1, then slide the stand upwards to the main Plasma Display until it engages the installation bolts 1. [. . . ] Select the appropriate screws, hooks, chains and other fittings after first inspecting the surface carefully to determine its thickness and composition and after consulting a professional installer if necessary. , please be sure that the Plasma Display is held by two people. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PIONEER PDK-TS23
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PIONEER PDK-TS23 will begin.
