User manual PIONEER PDP-436RXE

[. . . ] Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. The wires in this mains lead are coloured in accordance with the following code: Green and Yellow : Earth Blue : Neutral Brown : Live If the plug provided is unsuitable for your socket outlets, the plug must be cut off and a suitable plug fitted. The cut-off plug should be disposed of and must not be inserted into any 13 amp socket as this can result in electric shock. The plug or adaptor or the distribution panel should be provided with 13 A fuse. [. . . ] In the standby mode, when you press 0, the power turns on and images come from the INPUT 1 source. Or, when you press any button from 1 to 9, TV images display. If you have registered your favourite channels, selecting from the registered list may be the easiest way to tune to those channels. Using i +/i ­ on the remote control unit You can register up to 16 channels as your favourite channels. 1 While watching broadcasts, press ENTER to call up the Using e on the remote control unit Using g on the remote control unit Each time you press g, MTS toggles as shown below. In each of the sound multiplex mode selected using the g button, the display changes depending on broadcasting signals being received. Once the MONO mode is selected, the Plasma Display System sound remains mono even if the system receives a stereo broadcast. You must switch the mode back to I or II mode if you want to hear stereo sound again. Selecting a sound multiplex mode while the input source is INPUT 1 to 4 does not change the type of sound. In this case, sound is determined by the video source. Use the following procedure to capture and freeze one frame from a moving image that you are watching. A still image appears on the right screen while a moving image is shown on the left screen. When this function is not available, a warning message appears. 3 Repeat step 2 until you access the desired submenu item. Energy Save No Signal off No Operation off For some menu items, press / instead of /. You can return to the upper menu levels by pressing RETURN. This section describes how to automatically search for and set up TV channels. This section describes how to set up TV channels manually. When the Plasma Display System is switched on for the first time after purchase, the initial auto installation is initiated. You can automatically set language, country and channels in successive operations. Enter your 4-digit password using buttons 0 ­ 9. You can select from among 14 languages; English, German, French, Italian, Spanish, Dutch, Swedish, Portuguese, Greek, Finnish, Russian, Turkish, Norwegian, and Danish. [. . . ] Are batteries inserted with polarity (+, ­) aligned?Are you using it under strong or fluorescent lighting?Check if the input source for video has been unintentionally selected although you want to watch a TV channel. Check if you have selected a channel blocked with Child Lock. [. . . ]