User manual PIONEER PDP-506XDE

[. . . ] To prevent a fire or shock hazard, do not place any container filed with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. The following symbols are found on labels attached to the product. They alert the operators and service personnel of this equipment to any potentially dangerous conditions. This product complies with the Low Voltage Directive (73/23/EEC, amended by 93/68/EEC), EMC Directives (89/336/EEC, amended by 92/31/EEC and 93/68/EEC). [. . . ] Even when you start using the computer and a signal is received again, the system stays off. Does not place the system into the standby mode. Places the system into the standby mode if no signal is received for 15 minutes. Places the system into the standby mode When no signal is received from the personal computer for eight seconds. When you start using the computer and a signal is input again, the system is switched on. Five minutes before the system is placed into the standby mode, a message appears every minute. The system may not be placed into the standby mode when noise signals are present at the Media Receiver after a TV programme finishes. Digital TV (DTV) not only replaces the conventional analogue TV channels, but also provides more channels, clearer picture quality, and various types of useful information. A channel banner shows programme names, start/end time of programmes and other channel information. When executing Auto Installation (page 30), make sure to select "Digital" or "All" as the tuner type. Selecting the DTV mode when no channels yet searched will only display "DTV Setup" screen with only the item "Installation" selectable. You can, however, select the channel 1 by pressing 01 or 1 but have to wait for 2 seconds since the last digit input. P +/P ­ cannot pick up channels that are set to skip or not registered as favourites (with the Favourite function set to "On". If the channel is locked, you must enter the correct password each time (see page 58 ). While receiving DTV radio channels, the screen saver automatically starts when no operation is done for 3 minutes. Press the BLUE button to view the entire information. Some programmes may not provide detailed programme information. Due to inaccurate information provided by the broadcaster, some icons may appear or be absent in error. When in the DTV mode, press [ to turn subtitles on and off. When a programme is recorded with this function on, subtitles are also recorded. The system first erases all channel information and then starts channel search. This section describes how to reconfigure the DTV channel settings after setting up DTV channels using Auto Installation (page 30). [. . . ] Are you using it under strong or fluorescent lighting?Check if the input source for video or PC has been unintentionally selected although you want to watch a TV channel. Check if you have selected a channel blocked with Child Lock. Check the cable connection with the other equipment. [. . . ]