User manual PIONEER PDP-615EX

[. . . ] Thank you very much for purchasing this PIONEER product. Before using your Plasma Display, please carefully read the "Important Information" and these "Operating Instructions" so you will know how to operate the Plasma Display properly. This product is marketed assuming that it is installed by qualified personnel with enough skill and competence. Always have an installation specialist or your dealer install and set up the product. [. . . ] * When adjusting using the bar at the bottom of the screen, press the or button within 5 seconds. Note that this also restores other settings to the factory defaults. Storing picture settings This function allows you to store in memory the current input signal and PICTURE menu settings and to recall these settings when necessary. There are six picture memories, and notes of up to 15 characters can be added to each. Adjusting the picture The contrast, brightness, sharpness, color and tint can be adjusted as desired. When trying to enter the PICTURE submenu, make sure AV SELECTION is not set to DEFAULT. Adjusting the computer image Only the contrast and brightness can be adjusted when a computer signal is connected. MEMORY1 to 6: Picture memory with the specified number used. Maximum memories are 6, not depending on inputs. setting the memory · Use the L and M button to select the desired memory place, MEMORY1 to MEMORY6. Use the and buttons to select "SET", then press the MENU/SET button. Resetting the memory Use the L and M button to select the desired memory place, MEMORY1 to MEMORY6, then use the and buttons to select "RESET", and finally press the MENU/SET button. Use the and buttons to select "NOTE", then press the MENU/SET button. Use the EXIT button to delete the character at the cursor position. When you have finished inputting the note, press the MENU/SET button. Reducing noise in the picture Use these settings if the picture has noise due to poor reception or when playing video tapes on which the picture quality is poor. Types of noise reduction There are three types of noise reduction. Each has a different level of noise reduction. Information GAMMA settings The picture becomes darker as the number increases (in the sequence of 2. Adjusting the color to the desired level Use this procedure to adjust the white balance for each color temperature to achieve the desired color quality. Making the Low Tone adjustments This feature allows more detailed tone to be reproduced especially in the dark area. Information Adjusting the white balance R/G/B HIGH: White balance adjustment for white level R/G/B LOW: White balance adjustment for black level RESET: Resets settings to the factory default values. [. . . ] Press the power button on the monitor to turn on the power. Eliminate the light by closing curtains, pointing the light in a different direction, etc. Plug the monitor's power cord into a power outlet. Monitor's power does not turn on when the remote control's power button is pressed. [. . . ]