Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PIONEER PDP-S06-LR. We hope that this PIONEER PDP-S06-LR user guide will be useful to you.
Lastmanuals help download the user guide PIONEER PDP-S06-LR.
Detailed instructions for use are in the User's Guide.
[. . . ] This product is designed exclusively for use with the PDP-5030HD, PDP-503HDE, PDP-503HDG Pioneer plasma display. In order to prevent damage to the speaker system resulting from input overload, please observe the following precautions: ÷ Do not supply power to the speaker system in excess of the maximum permissable input. When connecting or disconnecting pin-plugs, be sure that amplifier power is OFF. [. . . ] Perform installation according to the following steps 1 to 2. 1 The top side fittings are different for the right and the left side, and they must be matched correctly. 2 Install the mounting fittings with bolts at the positions shown in the figure on the left. 1 To attach the speakers to the display, start by placing the upper screw where indicated, tightening until there is a small space of about 5mm between the head of the screw and the display. 2 Check the rear of the speakers for the LEFT and RIGHT indicators to make sure you are attaching the correct speaker to the corresponding right or left side. Make sure the UP mark is pointing up, and then attach the speaker by fitting the upper mounting over the head of the screw and sliding down until snug. 3 Affix the lower fitting to the display and tighten the screw about halfway. 4 Adjust the position so that the gap between the speaker and the display is uniform, and then tighten the screws firmly. When the display is to be moved after speaker installation, do not hold the display by the speakers. Hold the bottom of the display to move it. The grille nets are designed to protect the speakers, however excessive force (such as pushing on, or inserting objects between the grille nets) may result in damage. Install the unit marked "LEFT" on the left side of the display. 1 Switch off the power of the plasma display. For the black terminal (the terminal on the left side in the following figure). [. . . ] When cable cores stick out and ª and · Lines are shortcircuited, an excessive load will be applied to the plasma display and the operation will stop or trouble will be caused. When the polarity is reversed for one speaker (left or right) at the time of connection to the plasma display, the bass reproduction will be reduced, the sound positioning will be lost, and a correct stereo effect will not be obtained. NOTE: Specifications and design subject to possible modification without notice, due to improvements. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PIONEER PDP-S06-LR
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PIONEER PDP-S06-LR will begin.
