User manual PIONEER PDP-V401

[. . . ] PIONEER cannot assume liabilities for damage caused by mistake in installation or mouting, misuse, modification or a natural disaster. After installation, be sure to deliver this manual to the customer and explain to the customer how to handle the product. The plasma display panel consists of fine picture elements (cells) with more than 99. There may be some cells that do not produce light or remain lit. [. . . ] 35:1 When displaying enhanced split screen: 4:3 FULL The screen size is fixed to FULL when 720P or 1080I is input. 4:3 size screen Information is lost on both sides. Black bands do not appear at the top and bottom but information is lost on the left and right margins. This feature is available when the input signal is video, component (480I, 480P, 576I, 576P, 720P, 1080I) or RGB (525P or 625P signal from a scan converter) or HDMI (480I, 480P, 720P, 1080I, 576P). * If black bands appear on the top and bottom in the full size screen, select the 2. 35:1 size screen to avoid phosphor burnin. 14:9 size screen The normal size screen is displayed. * The picture has the same size as video pictures with a 4 : 3 aspect ratio. * This feature is available when the input signal is video, component (480I, 480P, 576I, 576P ) or RGB (525P or 625P signal from a scan converter) or HDMI (480I, 480P, 576P). the image is expanded in the horizontal direction. * Images compressed in the horizontal direction ("squeezed images") are expanded in the horizontal direction and displayed on the entire screen with correct linearity. Information LOW TONE settings AUTO: Will automatically appraise the picture and make adjustments. Adjusting the colors Use this procedure to adjust hue and color density for red, green, blue, yellow, magenta and cyan. You can accentuate the green color of trees, the blue of the sky, etc. Information Types of AV SELECTION MOVIE1, 2: Set this mode when watching video in a dark room. This mode provides darker, finer pictures, like the screen in movie theaters. STANDARD: Set this mode when watching video in a bright room. This mode provides pictures with distinct differences between light and dark sections. dYNAMIC: This mode provides brighter pictures than STANDARD. DEFAULT: Use this to reset the picture to the factory default settings. Setting the picture modes according to the brightness of the room There are four picture modes that can be used effectively according to the environment in which you are viewing the display. Adjusting the pedestal level (black level) This feature adjusts the video black level in a video image. [. . . ] Horizontal and / or vertical sync signal is not present when the Intelligent Power Manager control is on. The temperature inside the main unit has become too high and has activated the protector. ------ ------ · Replace both batteries with new ones. Plug the monitor's power cord into a power outlet. [. . . ]