User manual PIONEER PDR-04

[. . . ] Adjust the volume with the LEVEL control. 6 Press COPY START CD= CD-R. DISC 1 DISC 2 DISC 3 ALL FADER L ­dB R CD-RW FIX DIG COPY X1 Press POWER to switch on. [. . . ] Note: Do not use an adapter with 8cm CD-singles. The disc tray has guides for both 12cm and 8cm discs. The recorder automatically copies at double speed, so if you're listening to the recording as it's being made it will sound a little strange!After copying, the recorder will finalize the CD-R to make it playable on most ordinary CD players (see What's finalization below). This process takes just a couple of minutes after the CD has been copied. DISC 1 DISC 2 DISC 3 ALL FADER L ­dB R 8 40 18 6 0 OVER MIN SEC REC CD-R ANA COPY X2 3 Press OPEN/CLOSE 10 to close the disc tray. DISC 1 DISC 2 DISC 3 ALL FADER L ­dB R Remove the disc from the recorder before switching off. 8 40 18 6 0 OVER TRK STEP MIN SEC What's finalization? 40 18 6 0 8 X1 OVER 4 Press OPEN/CLOSE 0 to eject the CD-R disc tray. Place a blank CD-R or CD-RW disc, with the label/non-recording side face up, on to the disc tray. Press COPY START CD= CD-R. The recorder starts copying the track and stops automatically when it's finished. · Repeat steps 3 to 6 to copy more tracks. · See Finalizing a disc, opposite, if you want to finalize the disc now. If a CD-R is loaded, the CD-R indicator changes to CD. If a CD-RW is loaded, the finalize indicator lights in the display. [. . . ] If a CD-RW is loaded, the finalize indicator lights in the display. [. . . ]