User manual PIONEER PDR-F10

[. . . ] The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. ⷠThis player is not suitable for commercial use. [. . . ] Once finalized, a CD-R disc is no longer recordable, nor will you be able to set or clear skip IDs (see pages 28­29 for more on these). Finalization is not reversible for CD-Rs so be absolutely sure that everything on the disc is the way you want it before you start. CD-RW discs can also be finalized, although you can still erase the disc afterward and reuse it, so it's not anything like as final as it is with a CD-R disc. Not all CD players can play CD-RW discs even after finalization. During this time never switch off the power to the unit-- the disc may become unusable as a result. Check that the disc is free from dust, dirt and scratches--if necessary, clean the disc, following the guidelines on page 8. Use 4 or ¢ to select FINALIZE, then press SET. Finalization takes about four minutes; you'll see how long there is still to go in the display. None of the controls on the player or the remote have any effect during finalization. If, however, the recorder hasn't managed to finalize the disc within 10 minutes, you can abort the operation by pressing 7. If you do this, the disc won't be playable on an ordinary CD player. This mode lets you program a sequence (a playlist) of up to 24 tracks to play. Tracks can appear more than once in the playlist, or can be left out entirely. the playlist applies only to the disc in the recorder at the time. Once you take the disc out (or switch the power into standby), the playlist is lost. 4 Select a track to add to the playlist using the 4 and ¢ buttons. For example, to add track 3, press ¢ three times. The display briefly shows the playlist step number and the track. If the system isn't already in CD-R mode, press CD-R then stop playback. Use 4 or ¢ to select PROGRAM, then press SET. If you make a mistake, press CANCEL to delete the last (most recent) track programmed. When no more tracks can be added the display shows PGM FULL. [. . . ] The power cord is unplugged from the wall outlet. Plug the power cord into a power outlet. The power was turned off from the component Turn on the component supplying the (stereo amplifier, audio timer, etc. The CD-R or CD-RW disc in use has already been finalized. [. . . ]