User manual PIONEER PDSP-W

[. . . ] Do not use this product for any other purpose. installation Location · Do not neglect to verify the structure's suitability and safety of the installation location before starting the installation work. Please be advised to consult with professional installation workers in the case the wall is not sufficiently strong to support the unit and the main projector, or in the case any supplemental material should be needed to support the unit. Make sure to install this Wall Mount Unit in a location that can sufficiently support the combined weight of the product to be attached and Wall Mount Unit. [. . . ] Ask a professional installation worker to check the unit about every five years, making sure the unit can be used without problems. Pioneer is not liable for any damages resulting from improper assembling, installation, or use other than specified in the instructions, or accidental damages due to modification or natural disasters. This product is sold on the premise that it will be installed by a professional with sufficient technique and skills. Make sure to request installation and mounting from a professional construction company or your sales agent. Pioneer shall not be liable in any way for any accidents or damage resulting from improper installation or mounting, incorrect usage, remodeling, natural disasters or the like. Verify you have the enclosed parts for the Wall Mount Unit before installation. Make sure the foundation around the screw positions under the wall mount metal fitting has sufficient strength, using the actual size of the pattern, to determine the installation location of the Unit. Caution The combined weight of the Wall Mount Unit and the Digital Sound Projector to be attached is about 58 kg. Before installation, do not forget to make sure that the installation location on the wall has sufficient strength. If the wall's foundation is not strong enough, change the installation location, or reinforce the installation location. 2 Hook the wall mount metal fitting onto the wall. Insert a screw into the tentative screw hole, and tighten it so the wall mount metal fitting is level, then hook the wall mount metal fitting onto the screw. (Hook the wall mount metal fitting onto the screw in the center so you can easily make sure it is level. Hexagonal wrench x 1 Wall mount metal fitting (actual size) pattern x 1 Operating Instructions (this manual) x 1 Caution This product does not include screws to fix the wall mount metal fitting onto the wall. Caution This product does not include screws to fix the wall mount metal fitting onto the wall. Use screws suitable for the strength and material of the wall. 3 Attach the wall mount metal fitting onto the wall. Tighten six or more screws at the positions of the vertical slits, horizontal slits, or round holes to stabilize the installation of the unit. [. . . ] Assurez-vous que l'emplacement choisi pour l'installation de ce support mural peut supporter sans difficulté le poids combiné du support mural et du produit qui sera fixé au support. Attention Le poids combiné de l'installation du support mural et du Projecteur de Son Audionumérique qui sera fixé au support est d'environ 58 kg. Insérez une vis dans le trou de vis provisoire et serrez la de manière que la plaque de métal du support mural soit de niveau et ensuite accrochez la plaque du support mural à cette vis. A l'aide des vis cruciformes Phillips, (M5 x 40mm), procédez à la fixation provisoire de la plaque de métal du support en vissant jusqu'à une profondeur de 2 à 3 mm, le produit se trouvant fixé sur la plaque métallique du support mural. [. . . ]