User manual PIONEER PL-555Z

[. . . ] Other errors corrected FCC INFORMATION The equipment described in this manual has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in Part 15 of FCC rules. These specifications are designed to provide reasonable protection against radio and television reception interference in a residential installation. There is no guarantee that interference will not occur in a particular installation. To determine if your player is causing interference, turn the device OFF. [. . . ] Select Audio Function : Controls audio muting Format : Integer AU Explanation : This command sets audio output control. Either forced muting or regular control can be set. When 0 is set by argument, the forced muting mode is set and no sound is output even during file playback (both analog and digital). When 1 is set by argument, normal muting control is set. If any argument other than 0 or 1 is set, an E06 error message is returned. Execution : String 0AU<CR> R<CR> Audio Mute ON Status Return Player Play mode - 24 - 5. 22. Select Aspect Function Format Explanation : Select Aspect Ratio : Integer AP : The command sets the Aspect Ratio for playback. Argument Aspect Ratio 2 4:3 3 16:9 5. 23. Video Control Function : Video switch is turned ON / OFF Format : Integer VD Explanation : The command switches the video output ON or OFF then returns the completed status message. The squelch switch adjusts the video output when the video control is ON (during playback). If the player is in Park or Pause mode, the video output is OFF and the color background is displayed. Completed status message R is returned when playlist playback is started. An E06 error message is returned when a playlist for which no command has been input is set and when the argument is set to anything other than 1 to 20. 5. 28. Playlist Data Upload Function : Uploads the playlist data Format : BU Explanation : Playlist data can be uploaded to an external device. This command can be used while playback is stopped. If issued when playback is not stopped, while the file is being accessed or when data transfer is not possible, an E04 error message is returned. When executed during playback, the image being played may be stopped or disturbed. - 27 - If there is a checksum error, an E00 error message is returned after the data is sent. The command, data and status transmission/reception format are as shown below. Transmission/reception format Computer BU<CR> R<CR> Data length4byte 1st byte data 2nd byte data (N-1)th byte data Nth byte data Checksum (2byte) R<CR> Player Data length 4byte Main body of data + Checksum bytes (byte order little endian) 1st byte data ~ Nth byte data Main body of data's byte sequence Checksum2byte 2 lowest bytes of result of addition of data length to main body of data (1st to Nth byte) (byte order little endian) 5. 29. Playlist Data Download Function : Downloads the playlist data Format : BD Explanation : Playlist data can be downloaded from an external device. This command can be used while playback is stopped. If issued when playback is not stopped, while the file is being accessed or when data transfer is not possible, an E04 error message is returned. [. . . ] Wake Up On LAN This is a function for turning on the PL-555Z's power via the LAN. The PL-555Z's [Wake Up On LAN] function must be set to [On]. Procedure (1) Establish network connections between the PL-555Z and management terminal (computer, etc. ). (2) Set the IP address, etc. , at [Network Settings] on the Setup menu. (3) At [Network Settings] on the Setup menu, set [Wake Up On LAN] to [On]. (4) Set the PL-555Z to the standby mode. [. . . ]