User manual PIONEER PL-X21ZL

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. D3-4-2-1-1_En-A CAUTION This product is a class 1 laser product, but this product contains a laser diode higher than Class 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel. [. . . ] When set to Off, viewing is not restricted. Note · When Age Restriction is set to 255, viewing is not restricted. 48 En Changing the Country/Area code 1 Select and set Parental Lock Country Code Next Screen. Use the number buttons (0 to 9) or / to input the number, then press ENTER to set. Use / to move the cursor. 2 Set IP address. Use /// to set the IP address of the player or DNS server, then press ENTER. Network BD PLAYER IP Address Auto Set IP Address IP Address Subnet Mask Default Gateway 06 Off Auto Set DNS Server Address DNS Server (Primary) DNS Server (Secondary) Off CLEAR SECONDARY AUDIO VIDEO ENTER OUTPUT RESOLUTION · Auto Set IP Address On ­ The player's IP address is obtained automatically. Select this when using a broadband router or broadband modem that has a DHCP (Dynamic Host Configuration Protocol) server function. This player's IP address will automatically be allocated from the DHCP server. Off ­ The player's IP address must be set manually. Use the number buttons (0 to 9) to input the IP address, subnet mask and default gateway. · Auto Set DNS Server Address On ­ The DNS server's IP address is obtained automatically. Off ­ The DNS server's IP address must be set manually. Use the number buttons (0 to 9) to input the DNS server's IP address stipulated by your Internet service provider. · Use CLEAR to delete the last character. · Use / to move the displayed characters when all the input characters cannot be displayed. Key Characters 1. ­ abc2 def3 ghi4 jkl5 Key Characters mno6 pqrs7 tuv8 wxyz9 0 Erasing the additional data from BD-ROMs When a BD-ROM is played, additional data may be stored in the player's memory (local storage). If the message indicating low memory (local storage) appears, erase the BDMV data. Caution · When the BDMV data is erased, all the data of secondary video (Picture-in-Picture), secondary audio, bookmark, etc. · It takes time to erase the BDMV data for a while. Do not unplug the power cord while the data is being erased. 1 Select and set Options BDMV Data Erase Next Screen. Use / to select Yes, then press ENTER. 1 2 3 4 5 5 6 6 7 8 9 0 Input Port Number. Press , use the number buttons (0 to 9) to input the number. Press ENTER to set. OK to erase additional BDMV data?Do not turn power off during erasure. Yes No Displaying the network settings 1 Select and set Network Display Network Configuration Next Screen. [. . . ] This can also be indicated "48 kHz/16 bit", "96 kHz", etc. Secondary audio Some BD-ROMs include sub audio streams mixed with the main audio. These sub audio streams are called "secondary audio". On some discs this secondary audio is recorded as the audio for the secondary video. 07 MAC (Media Access Control) address A hardware identification number assigned specifically to the network device (LAN card, etc. ). Secondary video Some BD-ROMs include sub videos superimposed on the main videos using the Picture-in-Picture function. These sub videos are called "secondary video". MPEG (Moving Picture Experts Group) The name of a family of standards used to encode video and audio signals in a digital compressed format. [. . . ]