User manual PIONEER PL-X33Z

[. . . ] If the connected HDMI device is not compatible with DTS-HD Master Audio or DTS-HD High Resolution Audio, the signals are output in linear PCM (7. 1 channels) or DTS Digital Surround bitstream. If the connected HDMI device is not compatible with DTS Digital Surround bitstream, the signals are output in linear PCM (2 channels). When the output video resolution is set to 576i/480i or 576p/480p (480i or 480p for U. S. and Canadian models), the signals may be output as linear PCM 2-channel or DTS Digital Surround bitstream signals, depending on the HDMI High Speed Transmission setting and/or the connected HDMI device(s). Caution · The output from all terminals other than the ones selected for Audio does not sound as intended by the content provider. [. . . ] and worldwide patents issued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio | Essential are trademarks of DTS, Inc. All Rights Reserved. < VRY1217-A > En Crossover frequency The crossover frequency can be set at the speaker settings. The crossover frequency setting is the frequency (Hz) below which the bass component of channels whose speaker size is set to Small is distributed to the subwoofer or left and right channels for output, as well as the frequency (Hz) below which LFE signals (the channel normally output to the subwoofer) are output. BD-LIVE This player supports BD-ROM Profile 2. Therefore, it supports both the BONUSVIEW and BD-LIVE functions. BD-LIVE functions such as downloading movie trailers or additional audio and subtitle languages and playing on-line games can be enjoyed over the Internet. The additional data downloaded with the BD-LIVE function (trailers, etc. ) is stored in the internal memory (4 GB). Refer to the disc's instructions for details about BD-LIVE functions. Changing the crossover frequency · When there are no speakers whose speaker size is set to Small, select Bypass for the crossover frequency. · When there are speakers whose speaker size is set to Small, select the crossover frequency (Bypass cannot be selected). · Also refer to "Changing the speaker setup" in the "Advanced settings" section of the operating instructions. · Individual/Shared Data Erase Use this procedure to select and erase data downloaded with the BD-LIVE function and data used with the BONUSVIEW function. The list screen appears. Individual/Shared Data Erase BD PLAYER Shared Data Disc Name 1 Disc Name 2 Disc Name 3 Disc Name 4 Disc Name 5 Disc Name 6 Disc Name 7 15 items Troubleshooting Check in the same way as described under "Software updating" in the "Troubleshooting" section of the operating instructions. Perform the procedure at "Erasing data that has been added to BDs and application data" above. 02 This is displayed for discs presenting security risks related to connection to the Internet. Normally select No when this is displayed. To allow connection to the Internet, select Yes. This may be displayed even if the disc does not support the BDLive function. When a disc name is selected, the data downloaded with the BD-LIVE function and data used with the BONUSVIEW is erased. When Shared Data is selected, all the data downloaded with the BD-LIVE function and not associated to discs is erased. Use / to select the data to be erased, then press ENTER. · Application Data Erase Use this procedure to erase BD-ROM application data (high scores of games, bookmarks data, etc. ). · Storage Format Use this procedure to format the storage in which the data downloaded with the BD-LIVE function and data used with the BONUSVIEW function is stored. [. . . ] · Storage Format Use this procedure to format the storage in which the data downloaded with the BD-LIVE function and data used with the BONUSVIEW function is stored. *1 If you wish to erase individual data using Data Management, update the software to the latest version. When this is done, the function for erasing data using BDMV Data Erase is eliminated. Also, the data that has been saved before updating is moved to Shared Data under Individual/Shared Data Erase after updating. [. . . ]