User manual PIONEER S-H520V-W

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. D1-4-2-3_En IMPORTANT NOTICE ­ THE SERIAL NUMBER FOR THIS EQUIPMENT IS LOCATED IN THE REAR. PLEASE WRITE THIS SERIAL NUMBER ON YOUR ENCLOSED WARRANTY CARD AND D1-4-2-6-1_En KEEP IN A SECURE AREA. THIS IS FOR YOUR SECURITY. [Excluding XW-HTD630/640] NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] When you start program play-back, however, CD mode is canceled. · Repeat and random play is possible in CD mode (see Using repeat play on page 52 and Using random play on page 52). Playing only CDs, SACDs and MP3 discs (CD mode) Using this feature you can play only the CDs, SACDs and MP3 discs loaded in the disc tray-- automatically skipping over any DVDs and Video CDs loaded. This may be useful if you have a mixture of discs loaded but only want to play music: you don't have to keep track of what kind of disc is where in the disc tray. 1 Press CD MODE (SHIFT + DISC SKIP) to switch CD mode on. · The indicator on the front panel lights when CD mode is on. The first CD loaded automatically starts to play. Once all the CD/SACD/MP3 discs loaded have played, playback automatically stops. · To cancel the CD mode, press CD MODE (SHIFT + DISC SKIP) again. · If you open the disc tray and load a DVD, Video CD or JPEG disc in the front-most position then press (play) (on the front panel), CD mode is canceled. Scanning discs You can fast-scan discs forward or backward at various different speeds. 1 During playback, press or to start scanning. · There is no sound while scanning DVDs and Video CDs, and no subtitles while scanning DVDs. · You can't use A-B Repeat with DVD-Audio, SACD or MP3 discs. 1 During playback, press HOME MENU and select `Play Mode'. 2 Select `A-B Repeat' from the list of functions on the left. Play Mode The screen for SACDs, CDs and Video CDs shows a list of tracks. Disc Navigator Track 1-10 CD Track 01 Track 02 Track 03 Track 04 Track 05 Track 06 Track 07 Track 08 The screen for MP3 discs shows the folder names on the left and the track names on the right (note that any folder and track names that contain accented or non-roman characters, will show up with generic names ­ F_033, T_035, etc. ). Select a folder, or a track within a folder. Disc Navigator Folder 1-17 MP3 001. Vacuum tube A-B Repeat Repeat Random Program Search Mode A(Start Point) B(End Point) Off 3 Press ENTER on `A(Start Point)' to set the loop start point. 4 Press ENTER on `B(End Point)' to set the loop end point. After pressing ENTER, playback jumps back to the start point and plays the loop. · The minimum loop time is 2 seconds. 5 To resume normal playback, select `Off' from the menu. Playback starts after you press ENTER. · Another way to find a particular place on a disc is to use one of the search modes. See Searching a disc on page 56. 51 En 06 Playing discs Using repeat play There are various repeat play options, depending on the kind of disc loaded. It's also possible to use repeat play together with program play to repeat the tracks/chapters in the program list (see Creating and editing a DVD program list on page 53 and Creating and editing a non-DVD program list on page 54). [. . . ] 145 (W) x 235 (H) x 204 (D) mm/ 5 11/16 (W) x 9 1/4 (H) x 8 1/16 (D) in. 2 kg / 4 lb 7 oz Transmitter AC adapter: Power requirements . 12V/300mA Power consumption (without AC adapter) . 166 (W) x 56 (H) x 112 (D) mm 6 9/16 (W) x 2 3/16 (H) x 4 7/16 (D) in. Center speaker Enclosure . [. . . ]