User manual PIONEER S-LX70-LR

[. . . ] When using a graphic equalizer to emphasize loud sounds in the high-frequency range, do not use excessive amplifier volume. Do not try to force a low-powered amplifier to produce loud volumes of sound (the amplifier's harmonic distortion will be increased, and you may damage the speaker). Do not use the speaker to output distorted sound for long periods of time. Do not sit or stand on the speaker, or let children play on the speaker. [. . . ] If the length of cable required for left and right speakers differs, use cables of the same length, matched to the longer distance. Connections at speaker and amplifier terminals should be made as tight and secure as possible to help reduce contact resistance. When mounting the speakers onto walls using the brackets, connect the speaker cables before attaching speakers onto the brackets. Make sure that the wall you intend to mount the speakers on is strong enough to support them. Improper installation of the speakers could cause them to fall and cause damage or injuries to persons nearby. Use screws suitable for the wall material and support the weight of the speaker. If you are unsure of the qualities and strength of the walls, consult a professional for advice. Once decided on the location of installation (such as the wall space to the left and right of the TV), attach the speakers following the next procedures. Two types of brackets (for speakers) are supplied. When using alongside with a Pioneer plasma television, use the L-type brackets. When attaching flush against the wall, use the S-type brackets. The left and right wall brackets are shaped differently. Be sure to install the correct bracket on each side. If the cables' wires happen to be pushed out of the terminals, allowing the wires to come into contact with each other, it places an excessive additional load on the amp. This may cause the amp to stop functioning, and may even damage the amp. After connecting the plugs, pull lightly on the cables to make sure that the ends of the cables are securely connected to the terminals. Poor connections can create noise and interruptions in the sound. When using a set of speakers connected to an amplifier, you won't be able to obtain the normal stereo effect if the polarity (+ , ­) of one of the speakers (left or right) is reversed. 2 Paste the supplied wall mounting template on the area of installation. The left and right wall mounting templates are shaped differently. Attach the template level to the ground using an adhesive such as tape. Make sure the template is straight to avoid mounting the speaker crookedly. [. . . ] If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one). For countries not mentioned above, please contact your local authorities for the correct method of disposal. [. . . ]