User manual PIONEER S-P260S

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. D3-4-2-1-1_A1_En CAUTION This product is a class 1 laser product classified under the Safety of laser products, IEC 60825-1:2007. D58-5-2-2a_A1_En WARNING This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. D3-4-2-1-3_A1_En If the AC plug of this unit does not match the AC outlet you want to use, the plug must be removed and appropriate one fitted. [. . . ] · Select this when connecting to 2 channel stereo audio equipment. · Setting to PCM will output by converting each audio signal into PCM 2 channel audio signal. Auto Power Off This sets the Player so that power is automatically shut off if playback is stopped for about 10 minutes. Item Yes, No Settings Control This sets the Player to be controlled from the Flat Screen TV via the HDMI cable. Item Yes: No: Select this to operate this player with the remote control unit of a Flat Screen TV connected by cable. Select this when you do not want to use the control function. PCM: NOTE · See page 52 for information on output of next generation audio formats. · MPEG Audio is only output as PCM (Stereo) 48 kHz. NOTE · For details, refer to "About control function with HDMI " on page 25. · If "Component" is selected from the "Video Out Select" menu, control function with HDMI is not available. Select "HDMI" if you want to use control function with HDMI features. 43 Settings Playback Setting Parental Control This lets you set the Parental Control depending on the disc content. The available Parental Control Levels are shown below. The 4-digit PIN code number needs to be entered before the Parental Control Levels and the Country Code are set. The Parental Control Levels and the Country Code cannot be set if a PIN code has not been created or the PIN code is not entered. (The Angle Mark is displayed in the lower right screen. ) Item Yes, No 44 Settings System Reset You can reset all settings to the factory presets. Item Reset, Not Reset 3 4 5 Press to select "Communication Setup", then press ENTER. Press to select "Cable/Wireless Select", then press ENTER. Press to select the connection type, then press ENTER. · Cable: Select this to connect to the network using a LAN cable. · Wireless: Select this to connect to the network using a USB Wireless LAN Adaptor. Communication Setup By connecting to the Internet, you can enjoy BD-LIVE functions, YouTube videos and text information using the RSS reader function, as well as update this player's software. This section describes the procedure for making network settings. You can connect to the Internet either by using a LAN cable or by connecting a USB Wireless LAN Adaptor to one of the USB ports. NOTE · Check that LAN cable or USB Wireless LAN Adaptor is properly connected (page 20). · S-P260S/BDP-330 only: When USB Wireless LAN Adaptors are connected to both the USB ports on the player's front and rear panels, the USB Wireless LAN Adaptor last connected is used. · Check the following information about the wireless LAN access point beforehand: - Type of encryption and encryption key - SSID (network name) · For manually performing the setting, the following information of the connected router or modem is required. Confirm the information prior to the setting. [. . . ] The HDMI connection carries standard to high definition video signals and multi-channel audio signals to AV components such as HDMI equipped TVs, in digital form without degradation. Progressive format Compared to the Interlace format that alternately shows every other line of an image (field) to create one frame, the Progressive format shows the entire image at once as a single frame. This means that while the Interlace format can show 30 frames/60 fields in one second, the Progressive format can show 60 frames in one second. The overall picture quality increases and still images, text, and horizontal lines appear sharper. Interlace format Interlace format shows every other line of an image as a single "field" and is the standard method for displaying images on television. The even numbered field shows the even numbered lines of an image, and the odd numbered field shows the odd numbered lines of an image. Region code Code identifying a geographic region of compatibility for a BD/DVD. JPEG (pages 10, 34) JPEG (Joint Photographic Experts Group) is a still image data compression format and is used in most of digital cameras. Resume playback (page 27) If you stop playback while it is in progress, the Player stores the stop position in memory, and this function lets you playback from that point. Letter Box (LB 4:3) (page 42) A screen size with black bars on the top and bottom of the image to allow viewing of wide-screen (16:9) material on a connected 4:3 TV. Skip (page 36) This returns to the start of the chapter (or track) being played, or skips to the next chapter (or track). Linear PCM Sound Linear PCM is a signal recording format used for Audio CDs and on some DVD and Blu-ray discs. [. . . ]