User manual PIONEER SA-1040

[. . . ] Select Top Field First for the field order of interlaced video. To enable random access with MPEG2 and H. 264, make the following settings for each respectively. For MPEG2, add SH (Sequence Header) at the start of GOP (Group of Pictures). For H. 264, put IDR in GOV (Group of Video Object Plane) and add SPS (Sequence Parameter Set) and PPS (Picture Parameter Set). [. . . ] Make I (IDR) and P picture at intervals of 3. Do not select LPCM audio for low bit-rate videos (10 Mbps or less). Doing so may result in problems with the audio while the video is playing. Table 1 Video Format Container Codec MPEG-2 (ISO/IEC 13818-2) Profile@Level MP@ML 422P@ML MP@HL 422P@HL MP@L3. 1 MPEG2-TS (ISO/IEC 138181) MP@L4. 1 H. 264/AVC (ISO/IEC 14496-10) Video Bit Rate (max) 15 Mbps 50 Mbps 60 Mbps 60 Mbps 14 Mbps 50 Mbps (CAVLC) 30 Mbps (CABAC) 50 Mbps (CAVLC) 30 Mbps (CABAC) 50 Mbps (CAVLC) 20 Mbps (CABAC) 1280×720/50p, 59. 94p 1440×1080/50i, 59. 94i 1920×1080/50i, 59. 94i LPCM MPEG-1 Audio Layer II (MP2) Dolby Digital AAC (MPEG-4 AAC LC) Resolution 720×480/59. 94i 720×576/50i 1280×720/50p, 59. 94p 1440×1080/50i, 59. 94i 1920×1080/50i, 59. 94i 720×480/59. 94i 720×576/50i Audio Codec LPCM MPEG-1 Audio Layer II (MP2) Dolby Digital HP@L4. 1 H422@L4. 0 · Dolby and the double-D symbol are trademarks of Dolby Laboratories. · We recommend using the . m2t or . mpg file extensions. · Only file names in ASCII can be recognized. · Performing operations such as operating a menu, making network connections, etc. , while a high bit-rate video file is playing may stop or disrupt the video and/or audio. · Files in the 1440×1080 video file format are converted to 1920×1080 when the video is output by this player. Table 2 Audio Format Codec LPCM MPEG-1 Audio LayerII Dolby Digital AAC (MPEG-4 AAC LC) No. of Channels 2 CH 2 CH 2 CH 2 CH Sampling Frequency 48 kHz 48 kHz 48 kHz 48 kHz No. of Quantized Bits /Bit Rate (max) 16 bit 384 kbps 448 kbps 288 kbps Notes Conforming to SMPTE 302M-2002 ISO/IEC 11172-3 Dolby Digital Decoder Implementation Kit Version 3. 0 ISO/IEC 14496-3 List of Tested Encoders The encoders and their versions that created the content Pioneer used in verifying operation on the player are as follows. (For more detailed information, refer to the HD PILOT user's manual and/or HD PILOT Help screens). When you wish to divide a file that is 4 GB or larger with HD PILOT, put a check next to "When the file division is possible, it divides. " on the setting screen at right. Note: When this checkbox is turned on, it requires an additional 1 MB of free disk space in addition to the file size on the HDD being used, even if the file is less than 4 GB. When files are split, all files must be copied onto the SDHC Card. This includes the original video file, the split video files, the MAP file and a list file for managing the split files. Recommended SDHC Cards and How to Use Them We recommend using the following SDHC cards to ensure stability when playing video on the SA-1040 as well as for playing high bit-rate videos. Type of Card: SDHC 4 GB/8 GB/16 GB/32 GB CLASS 6 or CLASS 10 Card Maker: Panasonic, Toshiba, SanDisk A CLASS 6 SDHC card is guaranteed to provide 48 Mbps or faster transfer rate, while a CLASS 10 guarantees at least 80 Mbps, so the actual transfer rate (during play) will be even higher. When playing a 50 or 60 Mbps high bit-rate video on the SA-1040, measure the transfer rate of the actual SDHC card being used and confirm its real performance. How to Measure Card Transfer Rates The transfer speed of an SDHC card can be measured by the player or by the HD PILOT support software. For details, refer to the player's user's manual and/or the HD PILOT manual. Other Usage Precautions · When playing a 60 Mbps video file, try to use an SDHC card with an actual transfer rate of about 120 Mbps. · Before using a SDHC card, first initialize it with HD PILOT. [. . . ] · Before using a SDHC card, first initialize it with HD PILOT. During the initialization process, Video, Picture, Text and System folders are created automatically. · A MAP file is copied to the SDHC card's Video folder as a unit with its video file. · By way of example, if a 4GB or larger video file is split when the MAP file is created, they take the following file structure. [. . . ]