User manual PIONEER SA-608

[. . . ] However, some items are not listed because the setting can be easily recovered by users, such as the last map scale, the last status of AV operation screen, etc. Navigation functions All settings on "TMC Control Centre" "History" on "Address" Destination Menu [History] [Favourites] "Saved Criteria" on "POI" Navi Settings System Settings All settings All settings Pin icon data Others Speed camera data Anti-theft password Audio functions AV Settings SD, USB All settings All settings (*1) Volume setting for AV sources, EQ settings (*2) (*1) All settings including the setting on the "Function" menu are deleted. (*2) These settings are cleared only if you use AVIC-F500BT. [. . . ] (*2) These settings are cleared only if you use AVIC-F500BT. The user data stored in the internal memory of the unit may be erased if an unexpected error occurs during software installation. Pioneer is not responsible for any data loss or unavailability of user data. 4 Engb Chapter Instructions for upgrading Preparation for upgrade Checking the current version You may need the version information to confirm completion of upgrade. Check the version information using the following procedure. 1 Press the MENU button to display the "Top Menu", and then touch [Settings]. The "System Settings" menu appears. 3 Touch [Service Information] on the "System Settings" menu. 4 Write down the version displayed in "Map Version" and "Version". p To cancel the upgrade, touch [Cancel]. 02 3 Touch [OK]. Instructions for upgrading 4 Enter the password for authentication that you obtained, then touch [Done]. Getting the password for authentication You need to input this password accurately. -- Never start upgrading when the navigation unit runs with the battery. Otherwise, the up- 6 Engb Appendix Appendix Troubleshooting Problems in the procedures for updating Symptom The upgrade process doesn't start and the navigation system boots up as usual. Cause Upgrade SD memory card #2 has been inserted first. Upgrade SD memory card #1 has been inserted while the navigation system are turned on. The screen that cannot begin the upgrade process is displayed. Action (Reference) Eject the upgrade SD memory card #2 and insert the upgrade SD memory card #1. Turn the ignition switch OFF and back ON to reboot the navigation system. When the following screens are displayed, the upgrade will not start. [. . . ] Turn the ignition switch OFF and back ON to reboot the navigation system. When the following screens are displayed, the upgrade will not start. Eject the upgrade SD memory card #2 and reinsert it in the other screens; -- Splash screen -- The screen for the anti-theft password -- The screens for incoming call, talking, dialling Appendix Messages in the procedures for updating Message When What to do (Reference) An error has occurred and up- Failed to upgrade the data for some Consult your authorised Pioneer dealer. [. . . ]