User manual PIONEER TS-W307D4

[. . . ] If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be obtained from your local dealer. If the fitted moulded plug is unsuitable for your socket outlet, then the fuse shall be removed and the plug cut off and disposed of safely. [. . . ] these buttons also function as described below. Press RECEIVER first to access: BASS ­/+ Use to adjust Bass1 TRE ­/+ Use to adjust Treble1 Press TV first to access: DTV/TV Switches between the DTV and analog TV input modes for Pioneer flat screen TVs. 11 Number buttons and other component controls Use the number buttons to directly select the tracks on a CD, DVD, etc. There are other buttons that can be accessed after the RECEIVER button is pressed. 1 The tone controls are disabled when the listening mode is set to DIRECT or PURE DIRECT. Use the / buttons to select the channel and use the / buttons to adjust the level on each channel. pressing TEST TONE again exits the test tone mode. CH SELECT Press repeatedly to select a channel, then use +/­ to adjust the level (page 35). SLEEP Press to change the amount of time before the receiver switches into standby (30 min ­ 60 min ­ 90 min ­ Off). You can check the remaining sleep time at any time by pressing SLEEP once. 12 SOURCE Turns on or off the power of the Pioneer DVD/ DVR units when BD DVD or DVR is selected using the MULTI CONTROL buttons. The Front Stage Surround Advance function allows you to create natural surround sound effects using just the front speakers and the subwoofer. When you select STEREO you will hear the source through just the front left and right speakers (and possibly your subwoofer depending on your speaker settings). Listening to your system ADVANCE ­ Use to provide a rich surround sound effect directed to the center of where the front left and right speakers sound projection area converges. Selecting the TODOROKI mode provides a more powerful surround sound with the bass emphasized. Use the Stream Direct modes when you want to hear the truest possible reproduction of a source. TODOROKI 1 ­ A heavy bass mode with the bass emphasized to achieve a powerful sound. ⷠTODOROKI 2 ­ A heavy bass mode with the bass emphasized less than in the TODOROKI 1 mode. DIRECT ­ Sources are heard according to the settings made in the Surround Setup (speaker setting, channel level, speaker distance), as well as with dual mono settings. 1 You will hear sources according to the number of channels in the signal. ⷠPURE DIRECT ­ Analog and PCM sources are heard without any digital processing. When audio data is removed during the compression process, sound quality often suffers from an uneven sound image. [. . . ] No sound is output when a function is selected. No sound from surround or center speakers. If the subwoofer has a volume knob, make sure it's turned up. ⷠThe Dolby Digital or DTS source you are listening to may not have an LFE channel. [. . . ]