User manual PIONEER TX-111ZL

[. . . ] However the method of connecting and operating the unit is the same. IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. D3-4-2-1-1_A1_En NOTE: THE NO USER-SERVICEABLE PARTS COMPARTMENT WARNING IS LOCATED ON THE APPLIANCE BOTTOM. P1- 24- 2_En NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] The information is automatically recorded on the SD memory card/USB device. -- Cue point or loop playback information set at [HOT CUE] (A, B and C) -- Track's WAVE display information Calling out saved cue or loop points 1 2 3 Load an SD memory card/USB device in the TX-111ZL. Load the track whose cue or loop points you want to call out. Press [CUE/LOOP CALLc/d]. Cue and loop points are displayed as marks on the playing address display. Playback is moved to the selected point and paused. When multiple points are recorded, the point moves each time the button is pressed. Calling out Hot Cue Procedure for calling out hot cues (for discs) 1 2 Load an SD memory card/USB device in the TX-111ZL. Load a disc in the TX-111ZL. 4 Press [PLAY/PAUSEf]. Playback starts from the Cue or Loop point. When the disc's hot cues are recorded on the SD memory card/USB device, the HOT CUE indicator (A, B or C) flashes. Deleting cue or loop points individually 1 Load an SD memory card/USB device in the TX-111ZL. 3 Press the [HOT CUE] button (A, B or C) whose hot cue you want to call out. The hot cue is called out. If you do not want to call out a hot cue, press [HOT CUE REC/CALL] without pressing [HOT CUE] (A, B or C). Buttons for which no hot cue was not called out turn off. 2 Load the track containing the cue point or loop points you want to delete. Cue and loop points are displayed as marks on the main unit display's playing address display. En 17 3 Press [CUE/LOOP CALLc/d]. Playback is moved to the selected point and paused. When multiple points are recorded, the point moves each time the button is pressed. Pitch bend [VINYLCDJ] During playback, spin the outer section of the jog dial. The playing speed increases when spun clockwise, decreases when spun counterclockwise. When spinning is stopped, playback returns to the normal speed. The position of playback can be moved by moving your finger over the pad while touching it. Note that when this is done, the position on the playing address display may not be displayed properly and the sound may not be played properly. Using the [BROWSE] button Rearranging tracks (Sort menu) When in the library browse mode, the tracks can be rearranged using the Sort menu. (The Sort menu is not displayed when in the folder browse mode. ) Inputting characters Inputting search characters using the [SEARCH] buttons 1 Touch the [NEEDLE SEARCH] pad. 1 Press [MENU/UTILITY] while the tracks are displayed. The Sort menu is displayed to the right of the information display screen. Playback 2 The character directly above the position touched is enlarged. Select and enter the setting item. 2 Release your finger from the [NEEDLE SEARCH] pad. The enlarged character is input. To input more characters at this point, repeat the above procedure. The characters that can be input are letters A ­ Z, numbers 0 ­ 9 and symbols. The characters that can be input switch when the position just below [ABC] or [123] is pressed. is input, a single character is deleted. If input again, characWhen ters are deleted consecutively. The tracks are sorted according to the selected item. Sorting is canceled when [BACK] is pressed to return to the uppermost level. The types of sorting items on the Sort menu can be changed in the rekordbox preferences (environmental settings). Searching for tracks (SEARCH) !The search function can be used to search for tracks recorded on the media loaded in the set with [SEARCH]. [. . . ] AC 120 V, 60 Hz Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 W Power consumption (standby) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 4 W Main unit weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4. 6 kg External dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320 mm (W) x 106. 4 mm (H) x 405. 7 mm (D) Tolerable operating temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5 °C to +35 °C Tolerable operating humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ! Analog audio output (AUDIO OUT L/R) Output terminal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA terminal Output Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]