User manual PIONEER VSX-808RDS

[. . . ] If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be obtained from your local dealer. If the fitted moulded plug is unsuitable for your socket outlet, then the fuse shall be removed and the plug cut off and disposed of safely. [. . . ] With this, the receiver automatically detects what kind of source you're playing and selects multichannel or stereo playback as necessary. If the source is Dolby Digital, DTS, or Dolby Surround encoded, the proper decoding format will automatically be selected and shows in the display. 1 channel sound, especially suited to movie sources · dOLBY PLII MUSIC3 ­ Up to 5. 1 channel sound, especially suited to music sources · dOLBY PLII GAME ­ Up to 5. 1 channel sound, especially suited for video games · Press repeatedly until AUTO SURROUND shows briefly in the display (it will then show the decoding or playback format). Check the digital format indicators in the display to see how the source is being processed. 1 Stereo surround (matrix) formats are decoded accordingly using DOLBY PLII MOVIE (see Listening in surround sound above for more on these decoding formats). 2 For more options using this button, see Using Stream Direct on page 28. 3 When listening to 2-channel sources in DOLBY PLII MUSIC mode, there are three further parameters you can adjust: C. Listening to your system Try different modes with various soundtracks to see which you like. When you select STEREO you will hear the source through just the front left and right speakers (and possibly your subwoofer depending on your speaker settings). ⷠIf your subwoofer has a phase control switch, set it to the plus (+) sign (or 0°). However, the effect you can actually feel when PHASE CONTROL is set to ON on this receiver depends on the type of your subwoofer. set your subwoofer to maximize the effect. It is also recommended you try changing the orientation or the place of your subwoofer. If this cannot be done on your subwoofer, set the cutoff frequency to a higher value. ⷠIf the speaker distance is not properly set, you may not have a maximized PHASE CONTROL effect. ⷠThe PHASE CONTROL mode cannot be set to ON in the following cases: ­ When the PURE DIRECT mode is switched on. Listening to your system There are a number of additional sound settings you can make using the AUDIO PARAMETER menu. The defaults, if not stated, are listed in bold. important · The AUDIO PARAMETER menu is not available with MULTI IN input (see Selecting the multichannel analog inputs on page 32). Depending on the current status/mode of the receiver, certain options may not be able to be selected. [. . . ] Operate within 7 m, 30° of the remote sensor on the front panel (refer to page 5). If the problem still persists when connecting your HDMI component directly to your monitor, please consult the component or monitor manual or contact the manufacturer for support. ⷠDepending in the output settings of the source component, it may be outputting a video format that can't be displayed. Check that the components you are connecting are also HDCP-compatible. [. . . ]