User manual PIONEER VSX-D638-G

[. . . ] Check for the ASTA mark or the BSI mark on the body of the fuse. If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be obtained from your local dealer. If the fitted moulded plug is unsuitable for your socket outlet, then the fuse shall be removed and the plug cut off and disposed of safely. [. . . ] DELAY to OFF and adjust the delay time manually. For more details about the lipsync feature of your display, contact the manufacturer directly. Only when listening to 2-channel sources in Dolby Pro Logic IIx Music/Dolby Pro Logic II Music mode. Only when listening to 2-channel sources in Neo:6 MUSIC/CINEMA mode. Setting the Video options 0 to 7 Default: 3 C. WIDTHi (Center Width) (Applicable only when using a center speaker) There are a number of additional picture settings you can make using the VIDEO PARAMETER menu. The defaults, if not stated, are listed in bold. Important · Note that if an option cannot be selected on the VIDEO PARAMETER menu, it is unavailable due to the current source, setting and status of the receiver. DIMENSIONi Adjusts the depth of the surround sound balance from front to back, making the sound more distant (minus settings), or more forward (positive settings). PANORAMAi Extends the front stereo image to include the surround speakers for a `wraparound' effect. IMAGEj (Center Image) (Applicable only when using a center speaker) EFFECT ­3 to +3 Default: 0 · The VIDEO PARAMETER menu cannot be used when the input function is set to iPod/USB, CD, CDR, TUNER, BD or HDMI 1 to 4. 1 Press RECEIVER , then press VIDEO PARAMETER. OFF ON Adjusts the center image to 0 to 10 create a wider stereo effect with Defaults: vocals. Adjust the effect from 0 Neo:6 MUSIC: (all center channel sent to front 3 right and left speakers) to 10 Neo:6 (center channel sent to the center CINEMA: 10 speaker only). Motion) YNRc Adjusts the amount of noise reduction (NR) applied to the Y (brightness) component. Adjusts the sharpness of the highfrequency (detailed) elements in the picture. AUTO PAL OFF ­4 to +4 Default: 0 0 to +8 Default: 0 ­4 to +4 Default: 0 ­4 to +4 Default: 0 ­6 to +6 Default: 0 ­6 to +6 Default: 0 ­6 to +6 Default: 0 ­6 to +6 Default: 0 DETAILc SHARPc, f (Sharpness) Adjusts the overall brightness. BRIGHTc (Brightness) CONTRASTc Adjusts the contrast between light and dark. HUEc, g CHROMAc (Chroma Level) Adjusts the red/green balance. Adjusts saturation from dull to bright. a. · When set to a resolution with which the TV (monitor) is not compatible, no picture is output. Also, in some cases no picture will be output due to copyright protection signals. · When AUTO is selected, the resolution is selected automatically according to the capacity of the TV (monitor) connected by HDMI. When PURE is selected, the signals are output with the same resolution as when input (At this time, video signals are only output from the same type of terminals to which they were input). · When a display is connected by HDMI, if this is set to something other than PURE and 480i/576i analog signals are input, 480p/576p signals are output from the component output terminals. b. · If the image doesn't match your monitor type, adjust the aspect ratio on the source component or on the monitor. · NORMAL setting is only displayed when 480i/p or 576i/p video signals are being input. 62 En Using other functions 08 Switching the speaker system If you selected Speaker B in Surround back speaker setting on page 85, three speaker system settings are possible using SPEAKERS. [. . . ] AC 220 V to 230 V, 50 Hz/60 Hz Power consumption . 0. 5 W (KURO LINK OFF) 0. 8 W (KURO LINK ON) Dimensions . 420 (W) mm x 173 (H) mm x 433 (D) mm Weight (without package). 13. 5 kg Furnished Parts Number MCACC Setup microphone (APM7009). [. . . ]