User manual PIONEER X-RSM300

[. . . ] This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. install in accordance with the manufacturer's instructions. [. . . ] 4 Press PROGRAM/MEM again to save and select a next track. 5 Press 3 on the unit or 3/8 on the remote control to play the programmed music files. 6 To clear your selection, press 7 STOP (or 7 ), PROGRAM/MEM and then 7 STOP (or 7 ). If you record MP3/WMA files using the software which cannot create a FILE SYSTEM, for example "Direct-CD" etc. , it is impossible to playback MP3 files. We recommend that you use "Easy-CD Creator", which creates an ISO 9660 file system. ⷠDo not use special letters such as "/ : * ?Even if the total number of files on the disc has more than 1000, it will only be shown up to 999. Listening to CDs - More you can do pausing or restarting a CD 1 Press SET/CD PAUSE on the unit or 3/8 on the remote control during playback. 2 Press this button again to resume play. Listening to music from your external device The unit can be used to play the music from many types of external device. > If your TV has only one output for audio(MONO). Searching for a section within a track Hold 41 / ¡¢ on the unit or 4/¢ on the remote control during playback and release it at the point you want to listen to. Listening to your tracks (files) repeatedly or randomly You can play up to 20 tracks on a CD in order. Make sure both the FM and AM aerials are connected. Cassette tapes can be played back in this unit. Listening to cassette tapes - More you can do playing Fast backward or Forward Press 41 / ¡¢ (4 / ¢ on the remote control ) on the unit during playback, or stop, press 3 at a point you want. Listening to the radio - More you can do This function shows how to record from tape to tape 1 Press TAPE to select tape function. NOTE: In case you use the tape for the first time push the PUSH OPEN to open the tape door and then remove the cushion in it. You can enjoy media files saved on an USB device by connecting the USB device to the USB port of the unit. If you want to operate other function, see the CD playback section. Before disconnecting the USB device, change to any other function. [. . . ] When you are recording, look out for the following ⷠYou can check the recording percentage rate for the USB record on the screen during the recording. (MP3/ WMA CD only) · During recording MP3/ WMA, there is no sound. ⷠWhen you stop recording during playback, the file that has been recorded at that time will be stored. (Audio CD only) · Do not remove the USB device or turn off the unit during USB recording. [. . . ]